You had setup the VPN Community NPN-Stores' with 3 gateways. There are some issues with one remote gateway(l .1.1.1) and an your local gateway. What will be the best log filter to see only the IKE Phase 2 agreed networks for both gateways.
This log filter will show only the logs that have the action of “Key Install”, which means that the Security Gateway installed a new encryption key for the VPN tunnel1. It will also show only the logs that have the IP address of 1.1.1.1, which is the remote gateway that has some issues. Finally, it will show only the logs that have the Quick Mode, which is the IKE Phase 2 negotiation that establishes the agreed networks for both gateways2.
The other log filters are not correct because they either include the Main Mode, which is the IKE Phase 1 negotiation that establishes the secure channel between the gateways2, or they do not specify the IP address of the remote gateway.
Logging and Monitoring R81.20 Administration Guide
Remote Access VPN R81.20 Administration Guide
Remote Access VPN R81 Administration Guide
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit