While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz band due to the automatic channel assignment algorithm of the WLAN infrastructure. What should you do to prevent this?
A.
Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken
B.
Purchase and deploy new APs from a different vendor
C.
Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11
D.
Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result
The 2.4 GHz band has only three non-overlapping channels: 1, 6, and 11.Using other channels can lead to overlapping and interference.To prevent this, the automatic channel assignment settings should be configured to use only channels 1, 6, and 11, ensuring minimal overlap and optimal performance.
[Reference: CWDP-305 Official Study and Reference Guide, Chapter on Post-Design ValidationandTroubleshooting, ]
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit