As an implementation engineer, you have just received initial design specs from a network designer...

Question

As an implementation engineer, you have just received initial design specs from a network designer for your dual-band 802.11n deployment. The network design documents prescribe the following data rate configuration for the 2.4 GHz radio:
Basic Rates: 5.5, 6, 11, 12 Mbps
Supported Rates: 9, 18, 24, 36, 48, and 54 Mbps as well as MCS 0-15
What will result from this design strategy?

Accepted Answer

B. Protection mechanisms will always be in use on this network to support 5.5 and 11 Mbps as basic rates.

Answer

A. By disabling support for 1 and 2 Mbps while allowing 5.5 and 11 Mbps, the network will force 802.11b clients to use these higher data rates.

Answer

C. HR/DSSS (802.11b) stations will not be able to associate to the service set.

Answer

D. This configuration violates the IEEE specification that defines 6, 12, and 24 Mbps as mandatory data rates for 802.11g/n.

Pre-Summer Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: validbest

Exam CWDP-305 All Questions

CWNP CWDP Wi-Fi Design CWDP-305 Question # 47 Topic 5 Discussion

Correct Answer:

Options Selected by Other Users:

Contribute your Thoughts: