The power level at the Intentional Radiator (IR) is 250 mW. The IR is the point where the RF signal leaves the transmitter and enters the antenna system. To calculate the power level at the IR, we need to consider the output power level of the transmitter, the loss of the cable, and the gain of the antenna. The formula is:
Power level at IR (dBm) = Output power level (dBm) - Cable loss (dB) + Antenna gain (dBi)
We can convert the output power level of 50 mW to dBm by using the formula:
Power level (dBm) = 10 * log10(Power level (mW))
Therefore, 50 mW = 10 * log10(50) = 16.99 dBm
We can plug in the values into the formula:
Power level at IR (dBm) = 16.99 - 3 + 16 = 29.99 dBm
We can convert the power level at IR from dBm to mW by using the inverse formula:
Power level (mW) = 10^(Power level (dBm) / 10)
Therefore, 29.99 dBm = 10^(29.99 / 10) = 999.96 mW
However, since we need to round off the answer to the nearest integer value, we get:
Power level at IR (mW) = 1000 mW
References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 67; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 57.
Submit