HP ACA Campus Access Associate HPE6-A85 Question # 4 Topic 1 Discussion

This configuration script will achieve the task as it follows the guidelines given by the Senior Engineer. It creates VLAN 20 with name Mgmt, adds L3 SVI on VLAN 20 with IP address 10.1.1.10/24, creates LAG 1 with LACP mode active for the uplink, uses VLAN 20 as the native VLAN on the LAG, and ensures that the interfaces are all ON.References:https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6790/GUID-8F0E7E8B-0F4B-4A3C-AE7F-0F1B5A7F9C5D.html

Edge1# conf t

vlan 20

name Mgmt

interface vlan 20

ip address 10.1.1.10/24

no shut

interface lag 1

no shut

vlan trunk native 20

vlan trunk allowed all

lacp mode active

interface 1/1/51

no shut

lag 1

interface 1/1/52

no shut

lag 1

exit

This script correctly creates VLAN 20 with the name 'Mgmt', adds an L3 SVI for management using the specified IP address, and configures LACP for link aggregation (LAG 1) using the active mode. It also sets VLAN 20 as the native VLAN on the LAG and ensures all interfaces are enabled ('no shut' is the command to bring up the interface if it has been administratively shut down).