Once you have removed all 12 screws that secure the motherboard to the motherboard tray, what is the proper way to remove the motherboard?
A.
Make sure to touch the pins and shove the motherboard out of the tray.
B.
Use one hand the entire time to remove the motherboard tray and hold the motherboard in the bottom center as if you're holding a pizza.
C.
Tilt the chassis to shake it out of the tray.
D.
Avoid touching the pins and carefully slide the motherboard slightly out of the rear of the tray, then place one hand underneath the rear of the tray and continue sliding the motherboard out of the tray without tilting it up or down.
Removing the motherboardrequires careful handlingto preventbending pins, PCB damage, or static discharge.
Correct Removal Process:
First, remove all 12 screws securing the motherboard.
Avoid touching any exposed pins or contacts.
Carefully slide the motherboard slightly out of the rear of the tray.
Support it with one hand underneath to prevent bending.
Continue sliding it out without tilting it.
Why other options are incorrect?
A (Touch pins & shove motherboard)→ Touching pins cancause electrostatic damageandforcing it out can damage components.
B (Hold like a pizza)→ Usingone handdoes not provide enough support, increasing the risk ofbending or dropping the motherboard.
C (Tilt chassis & shake it out)→ This is acompletely impropermethod and canseriously damageconnectors and PCB components.
Official Documentation Reference:
Supermicro MI300X System Removal Guideadvises toslide the motherboard out carefully while supporting it underneath.
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit