Pass the VMware VCP-VCF Administrator 2V0-17.25 Questions and answers with ValidTests

In NSX 4.x integrated with VCF 9.0, default segment security profiles block DHCP servers by default. The NSX Admin Guide states: “To allow DHCP servers on a segment, edit the applied segment security profile and set the DHCP Server Block option to NO.”

Cloning profiles (B, C) is an optional best practice but not required for functionality. The DHCP server block resides in the security profile, not the IP discovery profile, making C and D incorrect. Therefore, the required step is to edit the default segment security profile, set DHCP Server Block = NO, and apply it.

In VMware Cloud Foundation, lifecycle management boundaries are defined at the workload domain level. If independent lifecycle and scaling control is required, the cluster must be deployed as a separate workload domain.

VCF 9.0 supports workload domains that either:

Use a dedicated NSX instance, or

Share an existing NSX Manager instance.

Because the requirement only states independent lifecycle and scaling (not network isolation), the correct and efficient approach is to:

Deploy the new cluster as a new workload domain with shared NSX.

Deploying within an existing workload domain (A or B) would tie lifecycle operations together.

Deploying with a new NSX instance (C) is unnecessary unless full NSX isolation is required.

Thus, the correct action is D.

In VMware vSphere with Supervisor (used within VCF), a vSphere Namespace allows administrators to define resource quotas for Kubernetes workloads.

The vSphere documentation specifies that administrators can configure limits on:

CPU resources

Memory resources

Storage capacity

These quotas control the maximum resources that workloads deployed within the namespace can consume.

Incorrect options:

The number of containers (A) is managed at the Kubernetes level, not directly as a namespace resource quota in vSphere.

The number of services (D) is a Kubernetes object count limit, not a vSphere namespace resource limit.

Thus, the three configurable resource limitations are CPU, Memory, and Storage.

In VMware Cloud Foundation (VCF) 9.0, the governance of Virtual Private Clouds (VPCs) allows for granular control over networking parameters. When a VPC is created in VCF 9.0, a VPC Connectivity Profile is automatically generated specifically for that instance if a pre-existing shared profile is not selected.

According to the VCF 9.0 Administration Guide (Networking Section):

VPC Isolation: Each NSX VPC serves as a distinct, isolated administrative and data plane boundary. While multiple VPCs can reside within a single NSX Project, their configurations—including the connectivity profiles—can be managed independently.

Profile Modification Impact: When an administrator edits the NSX Connectivity profile for a specific NSX Project and VPC, the system treats this as a targeted configuration update. Because the profile in this scenario was "generated automatically when the NSX VPC was created," it is uniquely associated with that specific VPC's lifecycle.

Scoped Changes: Modifying this specific profile does not trigger a global update across the entire VCF Automation organization, nor does it affect other VPCs within the project that may be using their own automatically generated or distinct profiles. This ensures that changes to one tenant's or application's networking environment do not cause unintended disruptions to others.

Per the VCF 9.0 Automation Provider Management Guide:

Supervisor Activation: “Kubernetes-based workloads require Supervisor to be enabled in the Management Domain before deploying organizations.”

Region Configuration: “Organizations for All Applications must be deployed into a preconfigured Region, defined in the Provider Management Portal.”NSX Federation (D) is optional for multi-site deployments. Supervisor is not activated in workload domains (B) but centrally in the management domain. VMware Kubernetes Service (E) is enabled per tenant but not required before Organization creation. Thus, correct prerequisites are A and C.

Comprehensive and Detailed Explanation:

The VCF Automation Networking Guide (9.0) documents that when an Organization for All Applications is created, networking constructs are provisioned automatically to provide immediate connectivity. Specifically, “During region creation, the system automatically deploys a Default VPC, a Provider Tier-0 Gateway, a VPC connectivity profile, and default SNAT rules to enable outbound access.” .

DNAT rules are not provisioned by default (they must be configured for inbound services). Likewise, NSX Transit Gateway is a multi-region design element, not automatically deployed for a single org setup. A VDS is a vSphere construct and not part of the NSX automation performed at this stage. Therefore, the automatically created items are: Default VPC (A), Provider Tier-0 Gateway (B), SNAT rule (E), and VPC Connectivity Profile (G).

When creating a Region in VCF Automation, multiple workload domains can be aggregated to provide capacity to Organizations. For consistent provisioning across domains, resource constructs must be uniform.

The VCF 9.0 Automation documentation specifies:

VM Classes must exist with identical names across integrated vCenters to ensure consistent deployment behavior.

Storage Classes must also be consistently defined across Supervisors to allow Kubernetes and VM workloads to consume storage predictably.

Region quotas (A) are applied after region creation.

Reserved VM Classes (C) are not a prerequisite unless specifically required for policy enforcement.

An Organization for VM Applications (D) is not required prior to region creation.

Thus, the administrator must validate:

Consistent VM Classes (B)

Consistent Storage Classes (E)

A VM Class predefines hardware for Supervisor-managed VMs: “The VM class… defines such parameters as the number of virtual CPUs, memory capacity, and reservation settings.”

Administration steps show these are configurable: “You can configure hardware resources such as CPU, memory, and different devices” when editing a VM class.

Additionally, the DCLI/API specification underscores CPU and Memory fields: “--cpu-count … Required.” and “--memory-mb … Required.” for a VM class.

While network adapters, PCI devices, and instance storage can also be added via advanced config, the question asks for two; CPU and Memory are canonical, always-present VM Class resources per the core definition above.

===========

After configuring SSO in VCF, administrators must assign appropriate roles in the management components to grant elevated privileges.

VCF 9.0 architecture includes these primary management components:

vCenter Server (A) – Manages clusters and VMs.

NSX Manager (B) – Manages networking and security services.

VCF Operations (D) – Provides monitoring and operational visibility.

Roles must be assigned within each of these systems to allow full administrative access.

vSAN (E) and ESX (F) are managed through vCenter, not independently assigned service roles.

VCF Installer (C) is used for deployment and does not require ongoing RBAC assignments for operations.

Therefore, the correct components are vCenter, NSX Manager, and VCF Operations.