Pass the CWNP CWAP Wi-Fi Analysis CWAP-405 Questions and answers with ValidTests

The function of the PHY layer is to convert PSDUs to PPDUs for transmissions and PPDUs to PSDUs for receptions. A PSDU (PHY Service Data Unit) is the data unit that is passed from the MAC layer to the PHY layer for transmission, or from the PHY layer to the MAC layer for reception. A PPDU (PHY Protocol Data Unit) is the data unit that is transmitted or received over the wireless medium by the PHY layer. A PPDU consists of a PSDU and a PHY header, which contains information such as modulation, coding, and data rate. The PHY layer adds or removes the PHY header to or from the PSDU during the conversion process. References: [Wireless Analysis Professional Study Guide CWAP-405], Chapter 4: 802.11 Physical Layer, page 97-98

 The GTK (Group Temporal Key) is encrypted within the third message of the 4-Way Handshake. The 4-Way Handshake is a process that establishes a secure connection between a STA (station) and an AP (access point) using WPA2 (Wi-Fi Protected Access 2), which is a security protocol that uses AES-CCMP (Advanced Encryption Standard-Counter Mode CBC-MAC Protocol) as its encryption algorithm. The 4-Way Handshake consists of four messages that are exchanged between the STA and the AP. The first message is sent by the AP to the STA, containing the ANonce (Authenticator Nonce), which is a random number generated by the AP. The second message is sent by the STA to the AP, containing the SNonce (Supplicant Nonce), which is a random number generated by the STA, and the MIC (Message Integrity Code), which is a value that verifies the integrity of the message. The third message is sent by the AP to the STA, containing the GTK, which is a key that is used to encrypt and decrypt multicast and broadcast data frames, and the MIC. The GTK is encrypted with the KEK (Key Encryption Key), which is derived from the PTK (Pairwise Temporal Key). The PTK is a key that is used to encrypt and decrypt unicast data frames, and it is derived from the PMK (Pairwise Master Key), the ANonce, and the SNonce. The fourth message is sent by the STA to the AP, containing only the MIC, to confirm the completion of the 4-Way Handshake. The other options are not correct, as they are not encrypted within the third message of the 4-Way Handshake. The PMK is a key that is derived from a passphrase or obtained from an authentication server, and it is not transmitted in any message of the 4-Way Handshake. The PTK is a key that is derived from the PMK, the ANonce, and the SNonce, and it is not transmitted in any message of the 4-Way Handshake. The GMK (Group Master Key) is a key that is generated by the AP and used to derive the GTK, and it is not transmitted in any message of the 4-Way Handshake. References: [Wireless Analysis Professional Study Guide CWAP-405], Chapter 8: Security Analysis, page 211-213

Open Authentication without encryption is not allowed when operating a BSS in the 6 GHz band, according to the 802.11 standard. Open Authentication is a type of authentication method that does not require any credentials or security information from a STA (station) to join a BSS (Basic Service Set). Open Authentication can be used with or without encryption, depending on the configuration of the BSS and the STA. Encryption is a technique that scrambles the data frames using an algorithm and a key to prevent unauthorized access or eavesdropping. However, in the 6 GHz band, which is a newly available frequency band for WLANs, Open Authentication without encryption is prohibited by the 802.11 standard, as it poses security and interference risks for other users and services in the band. The 6 GHz band requires all WLANs to use WPA3-Personal or WPA3-Enterprise encryption methods, which are more secure and robust than previous encryption methods such as WPA2 or WEP. The other options are not correct, as they do not describe scenarios where Open Authentication without encryption is not allowed by the 802.11 standard. When operating a BSS in the CBRS band, which is another newly available frequency band for WLANs, Open Authentication without encryption is allowed, but not recommended, as it also poses security and interference risks for other users and services in the band. When operating a BSS in FIPS mode, which is a mode that complies with the Federal Information Processing Standards for cryptographic security, Open Authentication without encryption is allowed, but not compliant, as it does not meet the FIPS requirements for encryption algorithms and keys. When operating a BSS in a government facility, Open Authentication without encryption is allowed, but not advisable, as it may violate the government policies or regulations for wireless security. References: [Wireless Analysis Professional Study Guide CWAP-405], Chapter 8: Security Analysis, page 220-221

The beamformee transmits a Feedback Matrix within the Compressed Beamforming frame to the beamformer. The Feedback Matrix contains information about the channel state between the beamformee and each spatial stream of the beamformer. This information is used by the beamformer to adjust its transmit weights and optimize its signal for the beamformee34. References: CWAP-405Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 4033; CWAP-405Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 4064.