An LTM Specialist must perform a packet capture on a virtual server with an applied...

Question

An LTM Specialist must perform a packet capture on a virtual server with an applied standard FastL4 profile. The virtual server 10.0.0.1:443 resides on vlan301.
Which steps should the LTM Specialist take to capture the data payload successfully while ensuring no other virtual servers are affected?

Accepted Answer

C. A new FastL4 profile should be created and applied to the virtual server with PVA acceleration disabled. Then the packet capture tcpdump -ni vlan301 should be executed on the command line interface.

Answer

A. The standard FastL4 profile should have PVA acceleration disabled. Then the packet capture tcpdump -ni vlan301 should be executed on the command line interface.

Answer

B. The packet capture tcpdump -ni vlan301 should be executed on the command line interface. There is no need to change profiles or PVA acceleration.

Answer

D. The LTM device is under light load. The traffic should be mirrored to a dedicated sniffing device. On the sniffing device, the packet capture tcpdump -ni vlan301 should be executed.

Pre-Summer Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: validbest

Exam 303 All Questions

F5 BIG-IP ASM 303 Question # 117 Topic 12 Discussion

Correct Answer:

Options Selected by Other Users:

Contribute your Thoughts: