Pass the ECCouncil CEH v13 312-50v13 Questions and answers with ValidTests

Objectives of Footprinting Draw Network Map - Combining footprinting techniques with tools such as Tracert allows the attacker to create diagrammatic representations of the target organization’s network presence. Specficially, it allows attackers to draw a map or outline of the target organization’s network infrastructure to know about the actual environment that they are going to break into. These network diagrams can guide the attacker in performing an attack. (P.114/98)

Twofish is an encryption algorithm designed by Bruce Schneier. It’s a symmetric key block cipher with a block size of 128 bits, with keys up to 256 bits. it’s associated with AES (Advanced Encryption Standard) and an earlier block cipher called Blowfish. Twofish was actually a finalist to become the industry standard for encryption, but was ultimately beaten out by the present AES.

Twofish has some distinctive features that set it aside from most other cryptographic protocols. For one, it uses pre-computed, key-dependent S-boxes. An S-box (substitution-box) may be a basic component of any symmetric key algorithm which performs substitution. within the context of Twofish’s block cipher, the S-box works to obscure the connection of the key to the ciphertext. Twofish uses a pre-computed, key-dependent S-box which suggests that the S-box is already provided, but depends on the cipher key to decrypt the knowledge .

How Secure is Twofish?

Twofish is seen as a really secure option as far as encryption protocols go. one among the explanations that it wasn’t selected because the advanced encryption standard is thanks to its slower speed. Any encryption standard that uses a 128-bit or higher key, is theoretically safe from brute force attacks. Twofish is during this category.

Because Twofish uses “pre-computed key-dependent S-boxes”, it are often susceptible to side channel attacks. this is often thanks to the tables being pre-computed. However, making these tables key-dependent helps mitigate that risk. There are a couple of attacks on Twofish, but consistent with its creator, Bruce Schneier, it didn’t constitute a real cryptanalysis. These attacks didn’t constitue a practical break within the cipher.

Products That Use Twofish

GnuPG: GnuPG may be a complete and free implementation of the OpenPGP standard as defined by RFC4880 (also referred to as PGP). GnuPG allows you to encrypt and sign your data and communications; it features a flexible key management system, along side access modules for all types of public key directories.

KeePass: KeePass may be a password management tool that generates passwords with top-notch security. It’s a free, open source, lightweight and easy-to-use password manager with many extensions and plugins.

Password Safe: Password Safe uses one master password to stay all of your passwords protected, almost like the functionality of most of the password managers on this list. It allows you to store all of your passwords during a single password database, or multiple databases for various purposes. Creating a database is straightforward , just create the database, set your master password.

PGP (Pretty Good Privacy): PGP is employed mostly for email encryption, it encrypts the content of the e-mail . However, Pretty Good Privacy doesn’t encrypt the topic and sender of the e-mail , so make certain to never put sensitive information in these fields when using PGP.

TrueCrypt: TrueCrypt may be a software program that encrypts and protects files on your devices. With TrueCrypt the encryption is transparent to the user and is completed locally at the user’s computer. this suggests you’ll store a TrueCrypt file on a server and TrueCrypt will encrypt that file before it’s sent over the network.

Incident Handling and Response Incident handling and response (IH&R) is the process of taking organized and careful steps when reacting to a security incident or cyberattack. Steps involved in the IH&R process: 3.Incident Triage - The IH&R team further analyzes the compromised device to find incident details such as the type of attack, its severity, target, impact, and method of propagation, and any vulnerabilities it exploited. (P.84/68)

ARP Spoofing Attack ARP packets can be forged to send data to the attacker’s machine.Attackers flood a target computer’s ARP cache with forged entries, which is also known as poisoning. (P.1143/1127)

https://www.offensive-security.com/metasploit-unleashed/msfencode/

One of the best ways to avoid being stopped by antivirus software is to encode our payload with msfencode. Msfencode is a useful tool that alters the code in an executable so that it looks different to antivirus software but will still run the same way. Much as the binary attachment in email is encoded in Base64, msfencode encodes the original executable in a new binary. Then, when the executable is run, msfencode decodes the original code into memory and exe-cutes it.

In CEH v13 Module 04: Enumeration and Module 06: Malware Threats, when investigating Command-and-Control (C2) communication, it is important to determine whether the communication actually occurred and what data was sent.

C. Internet Firewall/Proxy log

Best source to confirm outbound connections to external IPs.

Proxy logs show which internal host made the connection, the timestamp, and sometimes even URL and payload.

Firewalls can indicate port usage, traffic volume, and connection duration.

This data gives a direct view of how severe the incident is, whether data exfiltration occurred, and which internal system is affected.

Why Other Options Are Less Effective Initially:

A. IDS Log: Only tells you that an alert was generated. May be false positive or triggered by a failed connection.

B. Event logs on Domain Controller: Useful for user account behavior, but not for network connections.

D. Event logs on the PC: May lack detail or be tampered with by malware.

The AndroidManifest.xml file contains information of your package, including components of the appliance like activities, services, broadcast receivers, content providers etc.

It performs another tasks also:

• it’s responsible to guard the appliance to access any protected parts by providing the permissions.

• It also declares the android api that the appliance goes to use.

• It lists the instrumentation classes. The instrumentation classes provides profiling and other informations. These informations are removed just before the appliance is published etc.

This is the specified xml file for all the android application and located inside the basis directory.

The ethical hacker conducted Test 1, which is a TCP/IP stack fingerprinting technique that uses the SYN and ECN-Echo flags to determine the OS of the target system. The SYN flag is used to initiate a TCP connection, and the ECN-Echo flag is used to indicate that the sender supports Explicit Congestion Notification (ECN), which is a mechanism to reduce network congestion. Different OSes have different implementations and responses to these flags, which can reveal their identity. For example, Windows XP and 2000 will reply with SYN and ECN-Echo flags set, while Linux will reply with only SYN flag set. By sending a TCP packet with these flags enabled to an open TCP port and observing the reply, the ethical hacker can probe the nature of the response and subsequently determine the OS fingerprint.

The ethical hacker adopted this specific approach because it is an advanced and stealthy technique that can evade some firewalls and intrusion detection systems (IDS) that may block or alert other types of packets, such as NULL, FIN, or Xmas packets. Moreover, this technique can provide more accurate and reliable results than other techniques, such as banner grabbing or passive analysis, that may depend on the availability or validity of the information provided by the target system.

The other options are not correct, as they describe different tests and reasons. Test 3 is a TCP/IP stack fingerprinting technique that uses the URG, PSH, SYN, and FIN flags to determine the OS of the target system. Test 2 is a TCP/IP stack fingerprinting technique that uses a NULL packet, which is a TCP packet with no flags enabled, to determine the OS of the target system. Test 6 is a TCP/IP stack fingerprinting technique that uses the ACK flag, which is used to acknowledge the receipt of a TCP segment, to determine the OS of the target system. References:

OS and Application Fingerprinting | SANS Institute

Operating System Fingerprinting | SpringerLink

OS and Application Fingerprinting - community.akamai.com

What is OS Fingerprinting and Techniques - Zerosuniverse

The payload that would have the most significant impact in the case of a successful SQL injection attack is OR ‘a’='a; DROP TABLE members; --. This payload combines the manipulation of the WHERE clause with a destructive action, causing data loss. This payload works as follows:

The OR ‘a’='a part of the payload is a logical expression that is always true, regardless of the input or the condition of the SQL statement. This part of the payload allows the attacker to bypass any authentication or authorization checks that may be implemented in the SQL statement, such as a login form or a search query.

The ; part of the payload is a statement terminator that marks the end of the current SQL statement and allows the attacker to inject another SQL statement after it. This part of the payload enables the attacker to execute multiple SQL statements in a single query, which is also known as stacked queries or batched queries.

The DROP TABLE members part of the payload is a destructive SQL statement that deletes the entire table named members from the database. This part of the payload causes data loss and may compromise the functionality and integrity of the application that relies on the table. The table name may vary depending on the target database, but the attacker can use other techniques, such as error-based or union-based SQL injection, to discover the table names before executing the drop statement.

The – part of the payload is a comment symbol that tells the SQL engine to ignore the rest of the query. This part of the payload helps the attacker to avoid any syntax errors or unwanted results that may arise from the original query.

The other options are not as impactful as option C for the following reasons:

A. ‘OR 'T="1: This payload manipulates the WHERE clause of an SQL statement, allowing the attacker to view unauthorized data. This payload is a common and basic SQL injection technique that injects a logical expression that is always true, such as 'OR 'T="1 or 'OR 1=1, to bypass the authentication or authorization checks of the SQL statement. This payload can allow the attacker to view data that they are not supposed to, such as user credentials, personal information, or financial records. However, this payload does not cause any data loss or modification, and it does not affect the functionality or integrity of the application.

B. ‘OR username LIKE '%: This payload uses the LIKE operator to search for a specific pattern in a column. This payload is a variation of the previous payload that injects a logical expression that is always true, such as 'OR username LIKE '% or 'OR 1 LIKE '%, to bypass the authentication or authorization checks of the SQL statement. The LIKE operator is used to compare a value with a pattern that may contain wildcard characters, such as % or _, which match any string or character. This payload can allow the attacker to view data that matches the pattern, such as usernames that start with a certain letter or contain a certain substring. However, this payload does not cause any data loss or modification, and it does not affect the functionality or integrity of the application.

D. UNION SELECT NULL, NULL, NULL – : This payload manipulates the UNION SQL operator, enabling the attacker to retrieve data from different database tables. This payload is an advanced SQL injection technique that injects the UNION SQL operator to combine the results of two or more SELECT statements into a single result set, which is then returned as part of the HTTP response. The UNION operator can be used to join the results from different tables that have the same number and type of columns. The NULL values are used to match the column types and avoid any errors. This payload can allow the attacker to retrieve data from tables that are not intended to be accessed by the application, such as system tables, configuration tables, or backup tables. However, this payload does not cause any data loss or modification, and it does not affect the functionality or integrity of the application.

References:

1: SQL Injection - OWASP Foundation

2: SQL Injection Payloads: How SQLi exploits work - Bright Security

3: SQL Injection - HackTricks

Agent Smith Attack

Agent Smith attacks are carried out by luring victims into downloading and installing malicious

apps designed and published by attackers in the form of games, photo editors, or other

attractive tools from third-party app stores such as 9Apps. Once the user has installed the app,

the core malicious code inside the application infects or replaces the legitimate apps in the

victim's mobile device C&C commands. The deceptive application replaces legitimate apps such

as WhatsApp, SHAREit, and MX Player with similar infected versions. The application sometimes

also appears to be an authentic Google product such as Google Updater or Themes. The

attacker then produces a massive volume of irrelevant and fraudulent advertisements on the

victim's device through the infected app for financial gain. Attackers exploit these apps to steal

critical information such as personal information, credentials, and bank details, from the

victim's mobile device through C&C commands.

A Denial of Service (DoS) attack is a type of cyberattack that aims to make a machine or network resource unavailable to its intended users by flooding it with traffic or requests that consume its resources. A TCP SYN flood attack is a type of DoS attack that exploits the TCP handshake process by sending a large number of SYN requests to the target server, without completing the connection. A UDP flood attack is a type of DoS attack that sends a large number of UDP packets to random ports on the target server, forcing it to check for the application listening at that port and reply with an ICMP packet. An ICMP flood attack is a type of DoS attack that sends a large number of ICMP packets, such as ping requests, to the target server, overwhelming its ICMP processing capacity.

The attacker’s strategy involves a unique mixture of TCP SYN, UDP, and ICMP floods, using ‘r’ packets per second. The server can handle ‘h’ packets per second before it starts showing signs of strain. If ‘r’ surpasses ‘h’, it overwhelms the server, causing it to become unresponsive. The attacker selects ‘r’ as a composite number and ‘h’ as a prime number, making the attack detection more challenging. This is because prime numbers are less predictable and more difficult to factorize than composite numbers, which may hinder the analysis of the attack pattern.

Considering ‘r=2010’ and different values for ‘h’, the scenario that would potentially cause the server to falter is the one where ‘h=1987’ (prime). This is because ‘r’ is greater than ‘h’ by 23 packets per second, which means the server cannot handle the incoming traffic and will eventually run out of resources. The other scenarios would not cause the server to falter, as ‘h’ is either greater than or very close to ‘r’, which means the server can either manage or barely cope with the incoming traffic. References:

What is a denial-of-service (DoS) attack? | Cloudflare

Denial-of-Service (DoS) Attack: Examples and Common Targets - Investopedia

DDoS Attack Types: Glossary of Terms

What is a Denial of Service (DoS) Attack? | Webopedia