Pass the Fortinet Certified Solution Specialist FCSS_NST_SE-7.6 Questions and answers with ValidTests

The miglogd daemon is running on CPU core ID 0.

The diagnose sys top command has been running for 18 minutes.

The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.

The cmdbsvr process is occupying 2.4% of the total user memory space.

If the neweli daemon continues to be in the R state, it will need to be manually restarted.

The egress interface associated with static route 8.8.8.8/32 is administratively up.

The default static route through 10.200.1.254 is not in the forwarding information base.

The default static route through port2 is in the forwarding information base.

The BGP route to 10.0.4.0/24 is not in the forwarding information base.

Perfect Forward Secrecy (PFS) is enabled in the configuration.

The local gateway IP address is 10.0.0.1.

It shows a phase 2 negotiation.

The initiator provided remote as its IPsec peer ID.

The TCP session has been successfully established.

The session was initiated from an authenticated user.

The session is being inspected using flow inspection.

The session is being offloaded.

SP Login dump

Authentication Response

Authentication Request

Assertion dump

The name of the configured LDAP server is Lab.

The user is authenticating using CN=John Smith.

FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.

FortiOS is performing the second step (Search Request) in the LDAP authentication process.

With the auxiliary session selling disabled, only auxiliary sessions are offloaded.

With the auxiliary session setting enabled. ECMP traffic is accelerated to the NP6 processor.

With the auxiliary session setting enabled. Iwo sessions are created in case of routing change.

With the auxiliary session setting disabled, for each traffic path. FortiGate uses the same auxiliary session.

The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the 8GP session with the local router.

An inbound route-map on local router is blocking the prefixes from neighbor 100.64.3.1.

All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.

The BGP session with peer 10.127.0.75 is up.

FortiTelemetry and Neighbor Discovery both operate using TCP.

The default port for Neighbor Discovery can be modified.

FortiTelemetry must be manually enabled on the FortiGate interface.

By default, the downstream FortiGate establishes a connection with the upstream FortiGate using TCP port 8013.

The advertised prefix of 10.20.30.0/24 was configured using the network command.

The first four prefixes are being advertised using a legacy route advertisement.

The advertised prefix of 10.20.30.0/24 is being advertised through the redistribution of another routing protocol.

The output shows all prefixes advertised by all neighbors as well as the local router.