Pass the Huawei HCPP-Storage H19-338 Questions and answers with ValidTests

iMaster NCE-FabricInsight is a network analysis platform that provides intelligent O&M for data center networks . It has the following features:

1-3-5 intelligent O&M: This is a methodology that enables network administrators to locate faults within 1 minute, identify root causes within 3 minutes, and rectify faults within 5 minutes . It uses AI algorithms and big data analysis to provide proactive fault prevention, rapid fault location, and intelligent fault recovery .

Network health check: This is a function that monitors the network status and performance in real time, and provides comprehensive network health reports and suggestions for improvement . It uses various indicators such as availability, reliability, latency, jitter, packet loss, and bandwidth utilization to evaluate the network health .

Flow analysis: This is a function that collects and analyzes the network traffic data, and provides granular visibility into the network flows and applications . It uses technologies such as sFlow, NetStream, and Telemetry to obtain the flow information, and supports features such as flow path tracing, flow quality analysis, flow anomaly detection, and flow optimization .

AI-scenario data visualization: This is a function that displays the network data in a visual and interactive way, and provides insights into the network behavior and trends . It uses technologies such as graph databases, natural language processing, and machine learning to present the network data in various scenarios, such as topology views, service views, device views, alarm views, and report views .

Capacity/traffic risk prediction: This is a function that predicts the future network capacity and traffic demand based on historical data and trend analysis, and provides suggestions for network planning and optimization . It uses technologies such as time series analysis, regression analysis, and neural networks to forecast the network growth and identify potential risks .

The CloudEngine S5736-S is a new-generation 10GE multi-rate switch launched by Huawei. It supports native AC (Access Controller) function, which enables it to manage up to 1024 APs and provide wireless services for up to 16K users.

AirEngine 8760-Xi-PRO is Huawei’s flagship Wi-Fi 6 product that has a unique industrial design with features such as an 18-degree angle of tilt for network ports and optical ports, a shark fin bionic heat dissipation channel, and a removable cover for IoT card installation . These features are designed to improve the performance, reliability, and convenience of the product. Easy and flexible is not an industrial design feature of the AirEngine 8760-Xi-PRO, but rather a general description of its deployment and management capabilities .

The maximum single-radio rate supported by Wi-Fi 6 products is 9.6 Gbit/s. This is achieved by using 1024-QAM modulation, 160 MHz channel bandwidth, and 8 spatial streams1

M-LAG can be deployed on server leaf nodes in NOF+ scenarios. According to the Huawei CloudFabric Data Center Network Solution White Paper, NOF+ (Network-Oriented Fabric+) is a data center network architecture that supports both Layer 2 and Layer 3 connectivity between servers and leaf nodes. M-LAG (Multi-Chassis Link Aggregation Group) is a technology that enables multiple leaf nodes to form a logical device that provides high availability, load balancing, and simplified management.

 NE8000 X4 and X8 are high-end core routers designed for large-scale IP backbone networks, data centers, and metro networks . They support various redundancy designs to ensure high availability and reliability, such as MPU (Main Processing Unit) 1+1 backup, SFU (Switch Fabric Unit) 7+1 backup, and PEM (Power Entry Module) 1+1 backup . MPU 1+1 backup means that two MPUs work in active/standbymode and provide control plane redundancy . SFU 7+1 backup means that eight SFUs work in N+1 mode and provide data plane redundancy . PEM 1+1 backup means that two PEMs work in active/standby mode and provide power supply redundancy . The NE8000 X4 and X8 do not support power supply 9+1 backup, which is a feature of the NE8000 X16 router .

M-LAG (Multi-Chassis Link Aggregation Group) is the recommended networking mode for leaf switches. According to the Huawei CloudFabric Data Center Network Solution White Paper, M-LAG enables multiple leaf switches to form a logical device that provides high availability, load balancing, and simplified management.

Huawei Wi-Fi 6 products implement 10 ms ultra-fast roaming for all terminals, not only Huawei terminals, by introducing a cache mechanism, ensuring that there is no frame freezing during roaming. According to the Huawei AirEngine Wi-Fi 6 Solution White Paper, Huawei Wi-Fi 6 products use a cache mechanism to store user information on APs and switches, which enables fast authentication and reconnection when users roam between APs. This mechanism is compatible with all terminals that support IEEE 802.11k/v/r standards.

CE6820 does not support 100GE uplink ports. According to the CloudEngine S6800 Series Switches Datasheet, CE6820 supports 48 x 10GE ports and 4 x 40GE ports, but not 100GE ports.

In the headquarters-branch VXLAN interconnection scenario, single-fabric networking is not supported. According to the Huawei CloudCampus Solution Description, headquarters-branch VXLAN interconnection is a scenario that connects multiple campus networks over a WAN using VXLAN tunnels. In this scenario, each campus network forms an independent fabric network with its own controller and gateway devices. Single-fabric networking is a scenario that connects multiple campus networks over a LAN usingVXLAN tunnels. In this scenario, all campus networks share the same fabric network with a unified controller and gateway devices.