Pass the iSQI ISTQB Foundation Level CTFL_Syll_4.0 Questions and answers with ValidTests

When a document management system is decommissioned, maintenance testing must include data migration testing to ensure that all documents are correctly transferred to a state archive, meeting legal requirements for long-term storage. This process verifies that data integrity is maintained during migration.

References:

ISTQB® CTFL Syllabus 4.0, Chapter 2.3, page 29: Maintenance Testing and Data Migration​

According to the decision table in the image, a Preferred Guest Card holder with a Silver room is eligible for an upgrade to Gold Luxury (YES), while a non-Preferred Guest Card holder, regardless of room type, is not eligible for any upgrade (NO). Therefore, Customer A (a Preferred Guest Card holder with a Silver room) would be offered an upgrade to Gold Luxury, and Customer B (a non-Preferred Guest Card holder with a Platinum room) would not be offered anyupgrade. References = The answer is derived directly from the decision table provided in the image; specific ISTQB Certified Tester Foundation Level (CTFL) v4.0 documents are not referenced.

Error guessing is a testing technique where experienced testers anticipate potential defects based on their knowledge of the application and past experiences. Fault attacks, which involve focusing on areas where defects are likely to occur based on previous failures, are a practical implementation of error guessing.

References:

ISTQB CTFL Syllabus V4.0, Section 4.4.1 on error guessing and fault attacks, explaining how testers use their experience to anticipate and target likely defects​​.

Effort estimate does not depend on the budget of the project, but rather on the scope, complexity, and quality of the software product and the testing activities1. Budget is a constraint that may affect the feasibility and accuracy of the effort estimate, but it is not a factor that determines the effort estimate. Effort estimate is the amount of work required to complete the testing activities, measured in terms of person-hours, person-days, or person-months2.

The other options are correct because:

A. Once the test effort is estimated, resources can be identified and a schedule can be drawn up, as they are interrelated aspects of the test planning process3. Resources are the people,tools, equipment, and facilities needed to perform the testing activities4. Schedule is the time frame and sequence of the testing activities, aligned with the project milestones and deadlines5.

B. Effort estimate can be inaccurate because the quality of the product under tests is not known, as it affects the number and severity of the defects that may be found and the rework that may be needed to fix them6. Quality is the degree to which the software product satisfies the specified requirements and meets the needs and expectations of the users and clients7.

D. Experience based estimation is one of the estimation techniques, which relies on the judgment and expertise of the testers and other project stakeholders to estimate the test effort based on similar projects or tasks done in the past. Experience based estimation can be useful when there is a lack of historical data, formal methods, or detailed information about the software product and the testing activities.

References =

1 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 154

2 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 155

3 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 156

4 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 157

5 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 158

6 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 159

7 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16

[8] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 160

[9] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 161

In a review process, the manager's responsibility is to ensure that sufficient time is allocated for the review activities. This includes planning and scheduling the review sessions, making sure that the team has enough time to conduct a thorough and effective review.

References:

ISTQB CTFL Syllabus V4.0, Section 3.2.3 on the roles and responsibilities in a review process, specifically mentioning the manager's role in ensuring adequate time for reviews​​.

This answer is correct because static testing and dynamic testing are both types of testing that can be used to highlight issues associated with non-functional characteristics, such as usability, performance, security, reliability, etc. Static testing is a type of testing that involves the analysis of software work products, such as requirements, design, code, or test cases, without executing them. Dynamic testing is a type of testing that involves the execution of software work products, such as code or test cases, using inputs and verifying outputs. Both static testing anddynamic testing can be applied to different test levels and test types, and can use different test techniques and tools, to evaluate the non-functional characteristics of the software product. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.2.1.1, Section 2.2.1.2

Test exit criteria are the conditions that must be fulfilled before concluding a particular testing phase. These criteria act as a checkpoint to assess whether we have achieved the testing objectives and are done with testing1. Test exit criteria are typically defined in the test plan document, which is one of the outputs of the test planning phase. The test plan document describes the scope, approach, resources, and schedule of the testing activities. It also identifies the test items, the features to be tested, the testing tasks, the risks, and the test deliverables2. According to the ISTQB® Certified Tester Foundation Level Syllabus v4.0, the test plan document should include the following information related to the test exit criteria3:

The criteria for evaluating test completion, such as the percentage of test cases executed, the percentage of test coverage achieved, the number and severity of defects found and fixed, the quality and reliability of the software product, and the stakeholder satisfaction.

The criteria for evaluating test process improvement, such as the adherence to the test strategy, the efficiency and effectiveness of the testing activities, the lessons learned and best practices identified, and the recommendations for future improvements.

Therefore, the test plan document is the most appropriate test document to find the test exit criteria described. The other options, such as test design specification, project plan, and requirements specification, are not directly related to the test exit criteria. The test design specification describes the test cases and test procedures for a specific test level or test type3. The project plan describes the overall objectives, scope, assumptions, risks, and deliverables of the software project4. The requirementsspecification describes the functional and non-functional requirements of the software product5. None of these documents specify the conditions for ending the testing process or evaluating the testing outcomes. References = ISTQB® Certified TesterFoundation Level Syllabus v4.0, Entry and Exit Criteria in Software Testing | Baeldung onComputer Science, Entry And Exit Criteria In Software Testing - Rishabh Software, Entry and Exit Criteria in Software Testing Life Cycle - STLC [2022 Updated] - Testsigma Blog, ISTQB® releases Certified Tester Foundation Level v4.0 (CTFL).

The best example of a test case for this user story should cover the acceptance criteria comprehensively. Option A addresses the critical aspects of the acceptance criteria:

Verifying the discount for the first timeslot (8 AM GMT) - ensuring it provides a 10% discount.

Verifying that changing the time slot removes the discount - ensuring the discount logic is correctly applied.

This test case effectively validates the functionality related to both the discount and the ability to change time slots, which are key parts of the user story's requirements​​.

Black-box testing techniques focus ontesting the functionality of the software without knowledge of its internal workings(D). They derive test cases fromspecifications, requirements, or expected behavior.Option Adescribes exploratory testing,Bcontradicts the definition by focusing on implementation, andCincorrectly includes "implied behavior," which is not a core characteristic of black-box testing.

Covering all transitions at least once is the highest coverage criterion for state transition based test cases, because it ensures that every possible change of state is tested at least once. This means that all the events that trigger the transitions, as well as the actions and outputs that result from the transitions, are verified. Covering all transitions at least once also implies covering all states at least once, but not vice versa. Therefore, option D is not the highest coverage criterion. Option C is the lowest coverage criterion, because it only tests the initial and final states of the system or component, without checking the intermediate states or transitions. Option A is incorrect, because the coverage criteria for state transition based test cases can be determined and compared based on the number of transitions and states covered. References = CTFL 4.0 Syllabus, Section 4.2.3, page 49-50.