Pass the NVIDIA-Certified Professional NCP-AIN Questions and answers with ValidTests

The tool specifically designed for testingInfiniBand connectivityis **ibping**. It functions similarly to the traditional ping utility but is optimized forInfiniBand fabrics.

From theNVIDIA InfiniBand Diagnostic Utilities Documentation:

"ibping tests the connectivity of InfiniBand nodes by sending management datagrams (MADs) and verifying the response from the destination LID or GUID."

Tests basicnode-to-nodereachability

Supports testing viaLID, GUID, orport number

Helps verify subnet manager routing and fabric health

Incorrect Options:

pingandtracerouteare IP-based, not fabric-aware.

ibnetdiscovermaps topology but doesn't test live connectivity.

Before upgrading the DOCA SDK on aBlueField DPU, it ismandatory to uninstall the existing OFED driversto prevent compatibility conflicts.

From theNVIDIA DOCA Installation Guide:

"Before upgrading DOCA or BlueField-related software, you must remove existing OFED packages using: /usr/sbin/ofed_uninstall.sh -force."

This ensures:

Clean driver state

No residual kernel modules or userspace libraries

Proper registration of new DOCA/OFED versions

Incorrect Options:

AandCmay not resolve conflicts.

Dinstalls but doesn’t remove conflicting packages.

EVPN Multi-homingenablesactive-active redundancy without inter-switch linksby usingoverlay routingover VXLAN and distributed control plane using BGP EVPN.

From the officialNVIDIA Cumulus Linux EVPN Multihoming Documentation:

"EVPN multihoming allows multiple Top-of-Rack (ToR) switches to connect to the same server while maintaining full layer-2 redundancy without the need for inter-switch links or traditional MLAG configuration."

Key benefits:

Simplified topology (no ISL/peer-link needed)

BGP-based control plane

Fast convergence

Active-active links per host NIC

Incorrect Options:

MLAGrequires ISL between switches and peer-link configuration.

VSS(Virtual Switching System) is a Cisco term, not supported in NVIDIA networking.

According to theNVIDIA Spectrum-X Switch Operating System (SX_OS) Troubleshooting Guide, theSystem Status LED behavioris a critical indicator of the switch’s internal operational state.

From the document:

“The System Status LED will blink green during system initialization. If the LED continues blinking for more than 5 minutes, it indicates that the Onyx OS hasfailed to load properly. The system may be stuck in the boot process, or the file system may be corrupted.”

This blinking LED beyond normal initialization time indicates that the system has either encountered a failure during software boot or is unable to transition from bootloader to the OS runtime environment (i.e., Onyx).

Key causes include:

Corrupted or missing system files.

Failed firmware or OS upgrade attempts.

Boot device (e.g., eMMC or SSD) issues or corrupted partitions.

Technically, during power-on:

The switch performs POST (Power-On Self Test).

Then the Onyx OS attempts to load from the boot partition.

If the Onyx OS kernel or root filesystem is invalid, the system halts boot, and the LED remains in ablinking state, as no successful OS load confirmation is triggered.

Remediation Steps (as per NVIDIA guide):

Access the switch throughconsoleandmonitor boot logs.

UseONIE recoveryor re-flash a stable Onyx OS version.

Check system storage integrity using built-in diagnostics.

Exact Extract Reference:

Source: NVIDIA SX_OS 3.9.3000 Documentation

Topic: Troubleshooting System Status LED

Extract: "If the LED blinks for more than 5 minutes and the switch is not accessible via CLI, the Onyx software failed to load properly and recovery procedures must be initiated."

=============

The NVIDIA NVUE Collection for Ansible includes pre-built roles designed to streamline automation tasks across various switch models and configurations. These roles encapsulate common network configurations, allowing for efficient and consistent deployment.​

By utilizing these roles, network administrators can:​

Apply standardized configurations across different devices.​

Reduce the complexity of playbooks by reusing modular components.​

Ensure consistency and compliance with organizational policies.​

This approach aligns with Ansible best practices, promoting maintainability and scalability in network automation.​

Before upgrading Cumulus Linux, it's essential to back up configuration files to a different server. The /etc directory is the primary location for all configuration data in Cumulus Linux. Specifically, the following files and directories should be backed up:​

/etc/frr/ - Routing application (responsible for BGP and OSPF)

/etc/hostname - Configuration file for the hostname of the switch

/etc/network/ - Network configuration files, most notably /etc/network/interfaces and /etc/network/interfaces.d/

/etc/cumulus/acl - Access control list configurations​

Cumulus Linux is a network operating system used on NVIDIA Spectrum switches, including those in the Spectrum-X platform, to provide a Linux-based environment forEthernet networking in AI and HPC data centers. When upgrading Cumulus Linux to a new version, it’s critical to migrate specific configuration files to preserve network settings and ensure continuity. The question asks for the two configuration file locations that should be migrated from the old installation during an upgrade.

According to NVIDIA’s official Cumulus Linux documentation, the key directories containing configuration files that should be migrated during an upgrade are /etc/cumulus/acl (for access control list configurations) and /etc/network (for network interface configurations). These directories store critical network settings that define the switch’s behavior, such as ACL rules and interface settings, which must be preserved to maintain network functionality after the upgrade.

Exact Extract from NVIDIA Documentation:

“When upgrading Cumulus Linux, you must back up and migrate specific configuration files to ensure continuity of network settings. The following directories should be included in the backup:

/etc/cumulus/acl: Contains access control list (ACL) configuration files that define packet filtering and security policies.

/etc/network: Contains network interface configuration files, such as interfaces and ifupdown2 settings, which define the network interfaces and their properties.Back up these directories before upgrading and restore them after the new version is installed to maintain consistent network behavior.”—NVIDIA Cumulus Linux Upgrade Guide

This extract confirms that options A and B are the correct answers, as /etc/cumulus/acl and /etc/network contain essential configuration files that must be migrated during a Cumulus Linux upgrade. These files ensure that ACL policies and network interface settings are preserved, which are critical for Spectrum-X configurations in AI networking environments.

TheMINHOProuting protocol, while efficient in finding minimal paths, does not inherently prevent credit loops. This can lead to deadlocks in the network. In contrast, routing protocols like UPDOWN and FAT TREE are designed to avoid such loops, ensuring more reliable network operation.​

InDPU Mode, theARM cores on BlueFieldown theNIC data path, while still allowing thehost system to access the DPU OS (via OOB or virtio).

From NVIDIA BlueField Documentation:

"In DPU Mode, the data path is offloaded to the BlueField Arm cores, enabling advanced security and networking functions, while still allowing host access to the BlueField OS."

This is different from:

NIC Mode: Data path controlled by host, ARM cores inactive.

Separated Host Mode: Complete isolation; host cannot access DPU OS.

Restricted Mode: Limited host access to DPU OS, but without full offload capabilities.

To enable SHARP (Scalable Hierarchical Aggregation and Reduction Protocol) aggregation using theNCCL-SHARP plugin, the following two environment variables are required:

NCCL_COLLNET_ENABLE=1

Enables NCCL’s support for CollNet (Collective Network) operations, including SHARP.

NCCL_SHARP_AUTOINIT=1

Automatically initializes the SHARP plugin when available, activating SHARP-based collectives.

From theNVIDIA NCCL User Guide – SHARP Plugin Section:

"NCCL_COLLNET_ENABLE must be set to enable collective network acceleration features."

"NCCL_SHARP_AUTOINIT enables automatic SHARP plugin integration at NCCL runtime."

Incorrect Options:

B. NCCL_ALGO=CollNet– This variable controls the algorithm used for collectives but does not enable SHARP.

C. NCCLSPECTRUM_ENABLE– This is not a documented NCCL variable.

Role-Based Access Control (RBAC)is implemented within NVIDIA's Unified Fabric Manager (UFM) to manage user permissions effectively. RBAC allows administrators toassign roles to users, each with specific permissions, ensuring that only authorized individuals can make changes to the fabric configuration. This structured approach to access control enhances security by limiting the potential for unauthorized modifications and streamlines the management of user privileges across the network.​