Pass the RedHat RHCE RH302 Questions and answers with ValidTests

Very Tricky question from redhat. Actually question is giving scenario to you to implement quota to neo user. You should apply the quota to neo user on /home that neo user shouldn’t occupied space more than 70K.

1.vi /etc/fstab

LABEL=/home/homeext3defaults,usrquota0 0To enable the quota on filesystem you should mount the filesystem with usrquota for user quota and grpquota for group quota.

2.touch /home/aquota.userCreating blank quota database file.

3.mount -o remount /homeRemounting the /home with updated mount options. You can verify that /home is mounted with usrquota options or not using mount command.

4.quotacheck -u /homeInitialization the quota on /home

5.edquota –u neo /homeQuota Policy editor

See the snapshot

Disk quotas for user neo (uid 500):

Filesystem blocks soft hard inodes soft hard

/dev/mapper/vo-myvol 2 30 70 1 0 0

Can you set the hard limit 70 and soft limit as you think like 30.

Verify using the repquota /home command.

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda?

Or

mke2fs –j /dev/hda? To create ext3 filesystem.

vi /etc/fstab

Write:

/dev/hda?/dataext3defaults1 2

11. Verify by mounting on current Sessions also:

mount /dev/hda? /data

While you load the X Window System, you will get the problem. To troubleshoot follow the following steps:

1.Check the /tmp is full ?

2.Check your quota, hard limit is already crossed ?

3.Check xfs service is running ?

4.Boot the system on runlevel 3 and execute the system-config-display command

5.Edit the /etc/inittab to set default runlevel 5.

id:5:initdefault:

Do the following steps as:

1.First check the size of Logical Volume: lvdisplay /dev/vo/myvol

2.Make sure that the filesystem is in a consistent state before reducing:

# fsck –f /dev/vo/myvol

3.Now reduce the filesystem by 200MB.

# resize2fs /dev/vo/myvol 200M

4.It is now possible to reduce the logical volume.

#lvreduce /dev/vo/myvol –L 200M

4.Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol

5.Verify that the size comes in online or not: df -h

Do the following steps as:

vi /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=x.x.x.x

NETMASK=x.x.x.x

Enter the IP Address as given station number by your examiner: example: 172.24.0.1

Enter Subnet Mask

Enter Default Gateway and primary name server

press on ok

ifdown eth0

ifup eth0

verify using ifconfig

In the lab server is playing the role of router, IP forwarding is enabled. Just set the Correct IP and gateway, you can ping to 172.25.254.254.

Do the following steps as:

Think while Problems occurred on booting System on Runlevel 5 (X Window).

/tmp is full or not

Quota is already reached

Video card or resolution or monitor is misconfigured.

xfs service is running or not.

Do These:

1.df –h /tmp/tmp is full remove the unnecessary file

quota usernameif quota is already reached remove unnecessary file from home directory.

Boot the System in runlevel 3.you can pass the Kernel Argument from boot loader.

Use command: system-config-displayIt will display a dialog to configure the monitor, Video card, resolution etc.

Set the Default Runlevel 5 in /etc/inittab

id:5:initdefault:

6.Reboot the System you will get the GUI login Screen.

When root unable to login into the system think:

1. Is password correct?

2. Is account expired?

3. Is terminal Blocked?

Do these Steps:

Boot the System on Single user mode.

Change the password

Check the account expire date by using chage –l root command.

If account is expired, set net expire date: chage –E “NEVER” root

Check the file /etc/securettyWhich file blocked to root login from certain terminal.

If terminal is deleted or commented write new or uncomment.

Reboot the system and login as a root.

Do the following steps as:

1.Verify the File whether Shared or not ? : cat /etc/exports

2.Start the nfs service: service nfs start

3.Start the portmap service: service portmap start

4.Make automatically start the nfs service on next reboot: chkconfig nfs on

5.Make automatically start the portmap service on next reboot: chkconfig portmap on

6.Verify either sharing or not: showmount –e localhost

7.Check that default firewall is running on system ? if running flush the iptables using iptables –F and stop the iptables service.

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda? Where ? is your partition number

Or

mke2fs –j /dev/hda? To create ext3 filesystem.

mkdir /mnt/neo

vi /etc/fstab

Write:

/dev/hda?/mnt/neoext3defaults1 2

Verify by mounting on current Sessions also:

mount /dev/hda? /mnt/neo

It is due to either default runlevel or runlevel specific scripts.

id:?:initdefault:Where default runlevel is specified. It shouldn’t be 6.

l3:3:wait:/etc/rc.d/rc 6It reads the scripts of runlevel 6 while booting system on rulevel 3.

It should be like:

si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0

l1:1:wait:/etc/rc.d/rc 1

l2:2:wait:/etc/rc.d/rc 2

l3:3:wait:/etc/rc.d/rc 3 Should be like this

l4:4:wait:/etc/rc.d/rc 4

l5:5:wait:/etc/rc.d/rc 5

l6:6:wait:/etc/rc.d/rc 6