Pass the Splunk Enterprise Certified Architect SPLK-2002 Questions and answers with ValidTests

Decreasing the data model acceleration range will reduce the disk size requirements for a cluster of indexers running Splunk Enterprise Security. Data model acceleration creates tsidx files that consume disk space on the indexers. Reducing the acceleration range will limit the amount of data that is accelerated and thus save disk space. Setting the cluster search factor or replication factor to N-1 will not reduce the disk size requirements, but rather increase the risk of data loss. Increasing the number of buckets per index will also increase the disk size requirements, as each bucket has a minimum size. For more information, see Data model acceleration and Bucket size in the Splunk documentation.

The splunk clean kvstore command is used to clear the KV store. This command will delete all the collections and documents in the KV store and reset it to an empty state. This command can be useful for troubleshooting KV store issues or resetting the KV store data. The splunk clear kvstore, splunk delete kvstore, and splunk reinitialize kvstore commands are not valid Splunk commands. For more information, see Use the CLI to manage the KV store in the Splunk documentation.

The Indexer Discovery feature enables forwarders to dynamically connect to the available peer nodes in an indexer cluster. To use this feature, the manager node must be configured with the [indexer_discovery] stanza and a pass4SymmKey value. The forwarders must also be configured with the same pass4SymmKey value and the master_uri of the manager node. The pass4SymmKey value must be encrypted using the splunk _encrypt command. Therefore, option A indicates that the Indexer Discovery feature has not been fully configured on the manager node, because the pass4SymmKey value is not encrypted. The other options are not related to the Indexer Discovery feature. Option B shows the configuration of a forwarder that is part of an indexer cluster. Option C shows the configuration of a manager node that is part of an indexer cluster. Option D shows an invalid configuration of the [indexer_discovery] stanza, because the pass4SymmKey value is not encrypted and does not match the forwarders’ pass4SymmKey value12

1: https://docs.splunk.com/Documentation/Splunk/9.1.2/Indexer/indexerdiscovery  2: https://docs.splunk.com/Documentation/Splunk/9.1.2/Security/Secureyourconfigurationfiles#Encrypt_the_pass4SymmKey_setting_in_server.conf

The following security option must be explicitly configured, as it is not enabled by default:

Certificate authentication between forwarders and indexers. This option allows the forwarders and indexers to verify each other’s identity using SSL certificates, which prevents unauthorized data transmission or spoofing attacks. This option is not enabled by default, as it requires the administrator to generate and distribute the certificates for the forwarders and indexers. For more information, see [Secure the communication between forwarders and indexers] in the Splunk documentation. The following security options are enabled by default:

Data encryption between Splunk Web and splunkd. This option encrypts the communication between the Splunk Web interface and the splunkd daemon using SSL, which prevents data interception or tampering. This option is enabled by default, as Splunk provides a self-signed certificate for this purpose. For more information, see [About securing Splunk Enterprise with SSL] in the Splunk documentation.

Certificate authentication between Splunk Web and search head. This option allows the Splunk Web interface and the search head to verify each other’s identity using SSL certificates, which prevents unauthorized access or spoofing attacks. This option is enabled by default, as Splunk provides a self-signed certificate for this purpose. For more information, see [About securing Splunk Enterprise with SSL] in the Splunk documentation.

Data encryption for distributed search between search heads and indexers. This option encrypts the communication between the search heads and the indexers using SSL, which prevents data interception or tampering. This option is enabled by default, as Splunk provides a self-signed certificate for this purpose. For more information, see [Secure your distributed search environment] in the Splunk documentation.

Data Model acceleration is a feature that enables faster searches over large data sets by summarizing the raw data into a more efficient format. Data Model acceleration consumes additional disk space, as it stores both the raw data and the summarized data. The amount of disk space required depends on the size and complexity of the Data Model, the retention period of the summarized data, and the compression ratio of the data. According to the Splunk Enterprise Security Planning and Installation Manual, Data Model acceleration is one of the factors that strongly impacts storage sizing requirements for Enterprise Security. The other factors are the volume and type of data sources, the retention policy of the data, and the replication factor and search factor of the index cluster. The number of scheduled (correlation) searches, the number of Splunk users configured, and the number of source types used in the environment are not directly related to storage sizing requirements for Enterprise Security1

1: https://docs.splunk.com/Documentation/ES/6.6.0/Install/Plan#Storage_sizing_requirements

The site_mappings attribute should be added to the master node’s server.conf file when decommissioning a site in an indexer cluster. The site_mappings attribute is used to specify how the master node should reassign the buckets from the decommissioned site to the remaining sites. The site_mappings attribute is a comma-separated list of site pairs, where the first site is the decommissioned site and the second site is the destination site. For example, site_mappings = site1:site2,site3:site4 means that the buckets from site1 will be moved to site2, and the buckets from site3 will be moved to site4. The available_sites attribute is used to specify which sites are currently available in the cluster, and it is automatically updated by the master node. The site_search_factor and site_replication_factor attributes are used to specify the number of searchable and replicated copies of each bucket for each site, and they are not affected by the decommissioning process

A deployment plan should include business continuity and disaster recovery plans, current logging details and data source inventory, and current and future topology diagrams of the IT environment. These elements are essential for planning, designing, and implementing a Splunk deployment that meets the business and technical requirements. A comprehensive list of stakeholders, either direct or indirect, is not part of the deployment plan, but rather part of the project charter. For more information, see Deployment planning in the Splunk documentation.

 When adding or rejoining a member to a search head cluster, and the following error is displayed: Error pulling configurations from the search head cluster captain; consider performing a destructive configuration resync on this search head cluster member.

The corrective action that should be taken is to run the splunk resync shcluster-replicated-config command on this member. This command will delete the existing configuration files on this member and replace them with the latest configuration files from the captain. This will ensure that the member has the same configuration as the rest of the cluster. Restarting the search head, running the splunk apply shcluster-bundle command from the deployer, or running the clean raft command on all members of the search head cluster are not the correct actions to take in this scenario. For more information, see Resolve configuration inconsistencies across cluster members in the Splunk documentation.

The guidance Splunk gives for estimating size on for syslog data is 50% of original data size. This divides between files in the index as follows: rawdata is 15%, tsidx is 35%. The rawdata is the compressed version of the original data, which typically takes about 15% of the original data size. The tsidx is the index file that contains the time-series metadata and the inverted index, which typically takes about 35% of the original data size. The total size of the rawdata and the tsidx is about 50% of the original data size. For more information, see [Estimate your storage requirements] in the Splunk documentation.

All of the forwarders would still be phoning home to the old deployment server, because the forwarders are configured to use the old deployment server in $SPLUNK_HOME/etc/system/local. This is the local configuration directory that contains the settings that override the default settings in $SPLUNK_HOME/etc/system/default. The deploymentclient.conf file in the local directory specifies the targetUri of the deployment server that the forwarder contacts for configuration updates and apps. If the forwarders have the old deployment server’s targetUri in the local directory, they will ignore the updated deploymentclient.conf file that was deployed by the old deployment server, because the local settings have higher precedence than the deployed settings. To fix this issue, the forwarders should either remove the deploymentclient.conf file from the local directory, or update it with the new deployment server’s targetUri. Option C is the correct answer. Option A is incorrect because a version mismatch between the forwarders and the new deployment server would not prevent the forwarders from phoning home to the new deployment server, as long as they are compatible versions. Option B is incorrect because the new deployment server is configured and running, and there is no indication that it is not accepting connections from the forwarders. Option D is incorrect because the pass4SymmKey is the shared secret key that the deployment server and the forwarders use to authenticate each other. It does not affect the forwarders’ ability to phone home to the new deployment server, as long as it is the same on both sides12

1: https://docs.splunk.com/Documentation/Splunk/9.1.2/Updating/Configuredeploymentclients  2: https://docs.splunk.com/Documentation/Splunk/9.1.2/Admin/Wheretofindtheconfigurationfiles