Pre-Summer Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: validbest

Pass the Amazon Web Services AWS Certified Professional SAP-C02 Questions and answers with ValidTests

Exam SAP-C02 All Questions
Exam SAP-C02 Premium Access

View all detail and faqs for the SAP-C02 exam

Viewing page 8 out of 13 pages
Viewing questions 106-120 out of questions
Questions # 106:

A company is running a traditional web application on Amazon EC2 instances. The company needsto refactor the application as microservices that run on containers. Separate versions of the application exist in two distinct environments: production and testing. Load for the application is variable, but the minimum load and the maximum load are known. A solutions architect needs to design the updated application with a serverless architecture that minimizes operational complexity.

Which solution will meet these requirements MOST cost-effectively?

Options:

A.

Upload the container images to AWS Lambda as functions. Configure a concurrency limit for the associated Lambda functions to handle the expected peak load. Configure two separate Lambda integrations within Amazon API Gateway: one for production and one for testing.

B.

Upload the container images to Amazon Elastic Container Registry (Amazon ECR). Configure two auto scaled Amazon Elastic Container Service (Amazon ECS) clusters with the Fargate launch type to handle the expected load. Deploy tasks from the ECR images. Configure two separate Application Load Balancers to direct traffic to the ECS clusters.

C.

Upload the container images to Amazon Elastic Container Registry (Amazon ECR). Configure two auto scaled Amazon Elastic Kubernetes Service (Amazon EKS) clusters with the Fargate launch type to handle the expected load. Deploy tasks from the ECR images. Configure two separate Application Load Balancers to direct traffic to the EKS clusters.

D.

Upload the container images to AWS Elastic Beanstalk. In Elastic Beanstalk, create separate environments and deployments for production and testing. Configure two separate Application Load Balancers to direct traffic to the Elastic Beanstalk deployments.

Questions # 107:

A company has 10 accounts that are part of an organization in AWS Organizations AWS Config is configured in each account All accounts belong to either the Prod OU or the NonProd OU

The company has set up an Amazon EventBridge rule in each AWS account to notify an Amazon Simple Notification Service (Amazon SNS) topic when an Amazon EC2 security group inbound rule is created with 0.0.0.0/0 as the source The company's security team is subscribed to the SNS topic

For all accounts in the NonProd OU the security team needs to remove the ability to create a security group inbound rule that includes 0.0.0.0/0 as the source

Which solution will meet this requirement with the LEAST operational overhead?

Options:

A.

Modify the EventBridge rule to invoke an AWS Lambda function to remove the security group inbound rule and to publish to the SNS topic Deploy the updated rule to the NonProd OU

B.

Add the vpc-sg-open-only-to-authorized-ports AWS Config managed rule to the NonProd OU

C.

Configure an SCP to allow the ec2 AulhonzeSecurityGrouplngress action when the value of the aws Sourcelp condition key is not 0.0.0.0/0 Apply the SCP to the NonProd OU

D.

Configure an SCP to deny the ec2 AuthorizeSecurityGrouplngress action when the value of the aws Sourcelp condition key is 0.0.0.0/0 Apply the SCP to the NonProd OU

Questions # 108:

A company is developing an application that will display financial reports. The company needs a solution that can store financial Information that comes from multiple systems. The solution must provide the reports through a web interface and must serve the data will less man 500 milliseconds or latency to end users. The solution also must be highly available and must have an RTO or 30 seconds.

Which solution will meet these requirements?

Options:

A.

Use an Amazon Redshift cluster to store the data. Use a state website that is hosted on Amazon S3 with backend APIs that ate served by an Amazon Elastic Cubemates Service (Amazon EKS) cluster to provide the reports to the application.

B.

Use Amazon S3 to store the data Use Amazon Athena to provide the reports to the application. Use AWS App Runner to serve the application to view the reports.

C.

Use Amazon DynamoDB to store the data, use an embedded Amazon QuickStight dashboard with direct Query datasets to provide the reports to the application.

D.

Use Amazon Keyspaces (for Apache Cassandra) to store the data, use AWS Elastic Beanstalk to provide the reports to the application.

Questions # 109:

A company is running a two-tier web-based application in an on-premises data center. The application layer consists of a single server running a stateful application. The application connects to a PostgreSQL database running on a separate server. The application’s user base is expected to grow significantly, so the company is migrating the application and database to AWS. The solution will use Amazon Aurora PostgreSQL, Amazon EC2 Auto Scaling, and Elastic Load Balancing.

Which solution will provide a consistent user experience that will allow the application and database tiers to scale?

Options:

A.

Enable Aurora Auto Scaling for Aurora Replicas. Use a Network Load Balancer with the least outstanding requests routing algorithm and sticky sessions enabled.

B.

Enable Aurora Auto Scaling for Aurora writers. Use an Application Load Balancer with the round robin routing algorithm and sticky sessions enabled.

C.

Enable Aurora Auto Scaling for Aurora Replicas. Use an Application Load Balancer with the round robin routing and sticky sessions enabled.

D.

Enable Aurora Scaling for Aurora writers. Use a Network Load Balancer with the least outstanding requests routing algorithm and sticky sessions enabled.

Expert Solution
Questions # 110:

A company uses AWS Organizations. The company creates a central VPC in an AWS account that is designated for networking in a single AWS Region. The central VPC has an AWS Site-to-Site VPN connection to the company's on-premises network. A solutions architect must create another AWS account that uses the same networking resources that the central VPC uses.

Which solution meets these requirements MOST cost-effectively?

Options:

A.

Create a VPC in the new AWS account. Create a new Site-to-Site VPN connection for the on-premises connection.

B.

Use AWS Resource Access Manager to share the VPN connection in the central VPC with the new AWS account.

C.

Create a VPC in the new AWS account. Configure a virtual private gateway to connect to the central VPC.

D.

Use AWS Resource Access Manager to share the subnets in the central VPC with the new AWS account.

Questions # 111:

A company runs a simple Linux application on Amazon EKS by using nodes of the M6i (general purpose) instance type. The company has an EC2 Instance Savings Plan for the M6i family that will expire soon.

A solutions architect must minimize the EKS compute costs when the Savings Plan expires.

Which combination of steps will meet this requirement? (Select THREE.)

Options:

A.

Rebuild the application container images to support ARM64 architecture.

B.

Rebuild the application container images to support containers.

C.

Migrate the EKS nodes to the most recent generation of Graviton-based instances.

D.

Replace the EKS nodes with the most recent generation of x86_64 instances.

E.

Purchase a new EC2 Instance Savings Plan for the newly selected Graviton instance family.

F.

Purchase a new EC2 Instance Savings Plan for the newly selected x86_64 instance family.

Questions # 112:

An ecommerce company runs an application on AWS. The application has an Amazon API Gateway API that invokes an AWS Lambda function. The data is stored in an Amazon RDS for PostgreSQL DB instance.

During the company's most recent flash sale, a sudden increase in API calls negatively affected the application's performance. A solutions architect reviewed the Amazon CloudWatch metrics during that time and noticed a significant increase in Lambda invocations and database connections. The CPU utilization also was high on the DB instance.

What should the solutions architect recommend to optimize the application's performance?

Options:

A.

Increase the memory of the Lambda function. Modify the Lambda function to close the database connections when the data is retrieved.

B.

Add an Amazon ElastiCache for Redis cluster to store the frequently accessed data from the RDS database.

C.

Create an RDS proxy by using the Lambda console. Modify the Lambda function to use the proxy endpoint.

D.

Modify the Lambda function to connect to the database outside of the function's handler. Check for an existing database connection before creating a new connection.

Questions # 113:

A financial services company has an asset management product that thousands of customers use around the world. The customers provide feedback about the product

through surveys. The company is building a new analytical solution that runs on Amazon EMR to analyze the data from these surveys. The following user personas need to access the analytical solution to perform different actions:

• Administrator: Provisions the EMR cluster for the analytics team based on the team's requirements

• Data engineer: Runs E TL scripts to process, transform, and enrich the datasets

• Data analyst: Runs SQL and Hive queries on the data

A solutions architect must ensure that all the user personas have least privilege access to only the resources that they need. The user personas must be able to launch only applications that are approved and authorized. The solution also must ensure tagging for all resources that the user personas create.

Which solution will meet these requirements?

Options:

A.

Create IAM roles for each user persona. Attach identity-based policies to define which actions the user who assumes the role can perform. Create an AWSConfig rule to check for noncompliant resources. Configure the rule to notify the administrator to remediate the noncompliant resources.

B.

Set up Kerberos-based authentication for EMR clusters upon launch. Specify a Kerberos security configuration along with cluster-specific Kerberos options.

C.

Use AWS Service Catalog to control the Amazon EMR versions available for deployment, the cluster configuration, and the permissions for each user persona.

D.

Launch the EMR cluster by using AWS CloudFormation. Attach resource-based policies to the EMR cluster during cluster creation. Create an AWS Config rule to check for noncompliant clusters and noncompliant Amazon S3 buckets. Configure the rule to notify the administrator to remediate the noncompliant resources.

Questions # 114:

A company has a latency-sensitive trading platform that uses Amazon DynamoDB as a storage backend. The company configured the DynamoDB table to use on-demand capacity mode. A solutions architect needs to design a solution to improve the performance of the trading platform. The new solution must ensure high availability for the trading platform.

Which solution will meet these requirements with the LEAST latency?

Options:

A.

Create a two-node DynamoDB Accelerator (DAX) cluster Configure an application to read and write data by using DAX.

B.

Create a three-node DynamoDB Accelerator (DAX) cluster. Configure an application to read data by using DAX and to write data directly to the DynamoDB table.

C.

Create a three-node DynamoDB Accelerator (DAX) cluster. Configure an application to read data directly from the DynamoDB table and to write data by using DAX.

D.

Create a single-node DynamoD8 Accelerator (DAX) cluster. Configure an application to read data by using DAX and to write data directly to the DynamoD8 table.

Questions # 115:

A company recently wanted a web application from an on-premises data center to the AWS Cloud. The web application infrastructure consists of an Amazon CloudFront distribution that routes to an Application Load Balancer (ALB), with Amazon Elastic Container Service (Amazon ECS) to process requests. A recent security audit revealed that the web application is accessible by using both CloudFront and ALB endpoints. However. the company requires that the web application must be accessible only by using the CloudFront endpoint.

Which solution will meet this requirement with the LEAST amount of effort?

Options:

A.

Create a new security group and attach it to the CloudFront distribution. Update the ALB security group ingress to allow access only from the CloudFront security group.

B.

Update ALB security group ingress to allow access only from the CloudFront managed prefix list.

C.

Create a VPC interface endpoint for Elastic Load Balancing. Update the ALB scheme from internet-facing to internal_

D.

Extract CloudFront IPS from the AWS provided ip-ranges.json document. Update ALB security group ingress to allow access only from CloudFront IPs.

Questions # 116:

Question:

A company mandates that all internal AWS communications useprivate IPs. A solutions architect createdinterface VPC endpointsfor public AWS services like S3. However, service names are still resolving topublic IP addresses, and the internal apps cannot connect.

What should the architect do to resolve this issue?

Options:

A.

Update the subnet route table with a route to the interface endpoint.

B.

Enable the private DNS option on the VPC attributes.

C.

Configure the security group on the interface endpoint to allow access.

D.

Configure a private hosted zone with conditional forwarding.

Questions # 117:

Question:

A company is replicating an application in asecondary Region. The application usesDynamoDBandRDS for MySQL. The secondary Region must function independently during adisaster.

Options:

A.

Use DynamoDB global tables and an RDS read replica.

B.

Use DAX and a read replica.

C.

Use global tables and RDS Multi-AZ with standby in secondary Region.

D.

Use Streams and Lambda to copy data. Use read replica.

Questions # 118:

A company wants to migrate its data analytics environment from on premises to AWS The environment consists of two simple Node js applications One of the applications collects sensor data and loads it into a MySQL database The other application aggregates the data into reports When the aggregation jobs run. some of the load jobs fail to run correctly

The company must resolve the data loading issue The company also needs the migration to occur without interruptions or changes for the company's customers

What should a solutions architect do to meet these requirements?

Options:

A.

Set up an Amazon Aurora MySQL database as a replication target for the on-premises database Create an Aurora Replica for the Aurora MySQL database, and move the aggregation jobs to run against the Aurora Replica Set up collection endpomts as AWS Lambda functions behind a Network Load Balancer (NLB). and use Amazon RDS Proxy to wnte to the Aurora MySQL database When the databases are synced disable the replication job and restart the Aurora

B.

Set up an Amazon Aurora MySQL database Use AWS Database Migration Service (AWS DMS) to perform continuous data replication from the on-premises database to Aurora Move the aggregation jobs to run against the Aurora MySQL database Set up collection endpomts behind an Application Load Balancer (ALB) as Amazon EC2 instances in an Auto Scaling group When the databases are synced, point the collector DNS record to the ALB Disable the AWS DMS syn

C.

Set up an Amazon Aurora MySQL database Use AWS Database Migration Service (AWS DMS) to perform continuous data replication from the on-premises database to Aurora Create an AuroraReplica for the Aurora MySQL database and move the aggregation jobs to run against the Aurora Replica Set up collection endpoints as AWS Lambda functions behind an Application Load Balancer (ALB) and use Amazon RDS Proxy to write to the Aurora MySQL database When t

D.

Set up an Amazon Aurora MySQL database Create an Aurora Replica for the Aurora MySQL database and move the aggregation jobs to run against the Aurora Replica Set up collection endpoints as an Amazon Kinesis data stream Use Amazon Kinesis Data Firehose to replicate the data to the Aurora MySQL database When the databases are synced disable the replication job and restart the Aurora Replica as the primary instance Point the collector DNS reco

Questions # 119:

A company is serving files to its customers through an SFTP server that is accessible over the internet The SFTP server is running on a single Amazon EC2 instance with an Elastic IP address attached Customers connect to the SFTP server through its Elastic IP address and use SSH for authentication The EC2 instance also has an attached security group that allows access from all customer IP addresses.

A solutions architect must implement a solution to improve availability minimize the complexity of infrastructure management and minimize the disruption to customers who access files. The solution must not change the way customers connect

Which solution will meet these requirements?

Options:

A.

Disassociate the Elastic IP address from the EC2 instance Create an Amazon S3 bucket to be used for SFTP file hosting Create an AWS Transfer Family server. Configure the Transfer Family server with a publicly accessible endpoint Associate the SFTP Elastic IP address with the new endpoint. Point the Transfer Family server to the S3 bucket Sync all files from the SFTP server to the S3 bucket.

B.

Disassociate the Elastic IP address from the EC2 instance Create an Amazon S3 bucket to be used for SFTP file hosting Create an AWS Transfer Family Server Configure the Transfer Family server with a VPC-hosted, internet-facing endpoint Associate the SFTP Elastic IP address with the new endpoint Attach the security group with customer IP addresses to the new endpoint Point the Transfer Family server to the S3 bucket. Sync all files from the

C.

Disassociate the Elastic IP address from the EC2 instance. Create a new Amazon Elastic File System (Amazon EFS) file system to be used for SFTP file hosting. Create an AWS Fargate task definition to run an SFTP server Specify the EFS file system as a mount in the task definition Create a Fargate service by using the task definition, and place a Network Load Balancer (NLB) in front of the service. When configuring the service, attach the sec

D.

Disassociate the Elastic IP address from the EC2 instance. Create a multi-attach Amazon Elastic Block Store (Amazon EBS) volume to be used for SFTP file hosting. Create a Network Load Balancer (NLB) with the Elastic IP address attached. Create an Auto Scaling group with EC2 instances that run an SFTP server. Define in the Auto Scaling group that instances that are launched should attach the new multi-attach EBS volume Configure the Auto Sca

Questions # 120:

A company wants to use Amazon S3 to back up its on-premises file storage solution. The company's on-premises file storage solution supports NFS, and the company wants its new solution to support NFS. The company wants to archive the backup files after 5 days. If the company needs archived files for disaster recovery, t he company is willing to wait a few days for the retrieval of those files.

Which solution meets these requirements MOST cost-effectively?

Options:

A.

Deploy an AWS Storage Gateway files gateway that is associated with an S3 bucket. Move the files from the on-premises file storage solution to the file gateway. Create an S3 Lifecycle rule to move the file to S3 Standard-Infrequent Access (S3 Standard-IA) after 5 days.

B.

Deploy an AWS Storage Gateway volume gateway that is associated with an S3 bucket. Move the files from the on-premises file storage solution to the volume gateway. Create an S3 Lifecycle rule to move the files to S3 Glacier Deep Archive after 5 days.

C.

Deploy an AWS Storage Gateway tape gateway that is associated with an S3 bucket. Move the files from the on-premises file storage solution to the tape gateway. Create an S3 Lifecycle rule to move the files to S3 Standard-Infrequent Access (S3 Standard-IA) after 5 days.

D.

Deploy an AWS Storage Gateway file gateway that is associated with an S3 bucket. Move the files from the on-premises file storage solution to the tape gateway. Create an S3 Lifecycle rule to move the files to S3 Standard-Infrequent Access (S3 Standard-IA) after 5 days.

E.

Deploy an AWS Storage Gateway file gateway that is associated with an S3 bucket. Move the files from the on-premises file storage solution to the file gateway. Create an S3 Lifecycle rule to move the files to S3 Glacier Deep Archive after 5 days.

Viewing page 8 out of 13 pages
Viewing questions 106-120 out of questions