Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with ValidTests

Check Point’s FW Monitor is a powerful built-in tool for capturing network traffic at the packet level. The FW Monitor utility captures network packets at multiple capture points along the FireWall inspection chains. These captured packets can be inspected later using the WireShark.

References:

 Threat Extraction is a technology that removes potentially malicious features that are known to be risky from files (macros, embedded objects and more), rather than determining their maliciousness. By cleaning the file before it enters the organization, Threat Extraction preemptively prevents both known and unknown threats, providing better protection against zero-day attacks1. Any active contents of a document, such as JavaScripts, macros and links will be removed from the document and forwarded to the intended recipient, which makes this solution very fast2. The other options are either incorrect or irrelevant to the mechanism behind Threat Extraction. References: Threat Extraction (CDR) - Check Point Software, Check Point Document Threat Extraction Technology

Session unique identifiers are passed to the web API using the X-chkp-sid HTTP header option. The web API is a service that runs on the Security Management Server and enables external applications to communicate with the Check Point management database using REST APIs. To use the web API, you need to create a session with the management server by sending a login request with your credentials. The management server will respond with a session unique identifier (SID) that represents your session. You need to pass this SID in every subsequent request to the web API using the X-chkp-sid HTTP header option. This way, the management server can identify and authenticate your session and perform the requested operations. References: Check Point R81 REST API Reference Guide

 CPM process stores objects, policies, users, administrators, licenses and management data in a Postgres SQL database. This database is located in $FWDIR/conf and can be accessed using the pg_client command2. The other options are not the correct database type for CPM. References: Check Point R81 Security Management Administration Guide

The statement that is correct about the Sticky Decision Function is It is not supported with either the Performance pack of a hardware based accelerator card. The Sticky Decision Function (SDF) is a feature that ensures that packets from the same connection are handled by the same cluster member in a Load Sharing configuration. However, SDF is not compatible with SecureXL acceleration, which is enabled by default or by using a Performance pack or a hardware based accelerator card4. The other statements are either incorrect or outdated about SDF. References: Check Point R81 ClusterXL Administration Guide, Sticky Decision Function - Check Point CheckMates

 You can communicate with the API server using three command sources: SmartConsole GUI Console, mgmt_cli Tool, and Gaia CLI. Web Services are not a command source, but a way to access the API server using HTTP requests. References: Check Point Management APIs

SecureXL Templating is a feature that accelerates the processing of packets that belong to the same connection or session by creating a template for the first packet and applying it to the subsequent packets. SecureXL Templating is precluded by factors that prevent the creation of a template, such as source port ranges, encrypted connections, NAT, QoS, etc. References: SecureXL Mechanism

CPInfo is an auto-updatable utility that collects diagnostics data on a customer's machine at the time of execution and uploads it to Check Point servers (it replaces the standalone cp_uploader utility for uploading files to Check Point servers).

The CPInfo output file allows analyzing customer setups from a remote location. Check Point support engineers can open the CPInfo file in a demo mode, while viewing actual customer Security Policies and Objects. This allows the in-depth analysis of customer's configuration and environment settings.

References:

 To set the IP address and default gateway of the Management interface on a Check Point appliance, you can use the following commands:

set interface Mgmt ipv4-address 192.168.80.200 mask-length 24 - This command sets the IPv4 address of the Management interface to 192.168.80.200 and the subnet mask to 255.255.255.0 (24 bits).

set static-route default nexthop gateway address 192.168.80.1 on - This command sets the default gateway to 192.168.80.1 and enables the static route.

save config - This command saves the configuration changes to the appliance.

These commands are documented in the Check Point appliance initial installation guide, which you can find in the web search results.

The other options are incorrect because they use invalid syntax or parameters for the commands. For example, option B uses add static-route instead of set static-route, option C uses 0.0.0.0. instead of 0.0.0.0, and option D uses add static-route default instead of set static-route default.

 The key C is used to save the current CPView page in a filename format cpview_“cpview process ID”.cap"number of captures". This is a feature of CPView that allows the user to capture the current page for later analysis or troubleshooting. The file is saved in the /var/log directory on the Security Gateway. References: Check Point Resource Library, page 3.

The file that gives you a list of all security servers in use, including port number, is $FWDIR/conf/fwauthd.conf. Security servers are processes that handle application-level protocols such as HTTP, FTP, SMTP, etc., and perform security checks on them. Fwauthd.conf is a configuration file that defines which security servers are enabled, which ports they listen on, and which inspection points they are attached to. 

References:

The Software Container is a logical component in the Software Blade Architecture. There are three types of Software Containers: Security Management, Security Gateway, and Endpoint Security. The container enables the server functionality, and defines its purpose – e.g, management or gateway. https://downloads.checkpoint.com/dc/download.htm?ID=11608

High alert is not an alert option in Check Point. Alert options are ways to notify the administrator or other parties when a security event occurs. The available alert options are SNMP, Mail, User defined alert, Log, Popup alert, and User alert. References: Training & Certification | Check Point Software, Check Point Resource Library

The SmartEvent R81 Web application for real-time event monitoring is called SmartEventWeb. SmartEventWeb is a web-based interface that allows administrators to view and analyze security events from various sources, such as logs, reports, incidents, and indicators. SmartEventWeb provides dashboards, widgets, filters, and drill-down options to help administrators gain insights into their security posture. The other options are either incorrect or refer to different applications.