Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with ValidTests

The valid range for VRID value in VRRP configuration is 1 - 255. VRID stands for Virtual Router ID, and it is a number that identifies a virtual router in a VRRP cluster. A VRRP cluster consists of one or more routers that share a virtual IP address and provide redundancy and load balancing for network traffic. Each router in the cluster must have a unique VRID value, and the VRID value must match the VRID value configured on the interface that connects to the VRRP cluster. The VRID value can be any number from 1 to 255, inclusive. 

 Log Consolidator is NOT a SmartEvent component. SmartEvent is a unified security event management solution that provides visibility, analysis, and reporting of security events across multiple Check Point products. SmartEvent consists of three main components: SmartEvent Server, Correlation Unit, and Log Server. SmartEvent Server is responsible for storing and displaying security events in SmartConsole and SmartEventWeb. Correlation Unit is responsible for collecting and correlating logs from various sources and generating security events based on predefined or custom scenarios. Log Server is responsible for receiving and indexing logs from Security Gateways and other Check Point modules. Log Consolidator is not a valid component or blade of SmartEvent.

According to the Check Point website, you can use the pre_upgrade_verifier tool to verify if your management server is ready to upgrade to R81.20. This tool checks the compatibility of your current configuration and database with the target version, and provides a detailed report of any issues or warnings. The other tools are either used for exporting or importing databases, or not valid tools. References: Upgrade Verification Service

The path to monitor the compliance status of the Check Point R81.20 based management is Logs & Monitor > New Tab > Open compliance View. Compliance View is a feature that allows administrators to monitor and assess the compliance level of their Check Point products and security policies based on best practices and industry standards. Compliance View provides a dashboard that shows the overall compliance status, compliance score, compliance trends, compliance issues, compliance reports, and compliance blades for different security aspects, such as data protection, threat prevention, identity awareness, etc. To access Compliance View in R81.20 SmartConsole, administrators need to go to Logs & Monitor > New Tab > Open compliance View. The other options are either incorrect or not available in R81.20.

The “fw monitor” tool can be best used to troubleshoot network traffic issues. Fw monitor is a tool that allows administrators to capture packets at different inspection points in the Firewall kernel, and apply filters and flags to analyze the traffic. Fw monitor can help troubleshoot network connectivity problems, packet drops, NAT issues, VPN issues, and more. The other options are either not related or less suitable for fw monitor.

The correct statement about Security Gateway and Security Management Server failover in Check Point R81.X in terms of Check Point Redundancy driven solution is: Security Gateway failover is an automatic procedure but Security Management Server failover is a manual procedure. Security Gateway failover is a feature that allows a cluster of Security Gateways to provide high availability and load balancing for network traffic. If one Security Gateway fails or becomes unreachable, another Security Gateway in the cluster automatically takes over its role and handles the traffic without interrupting the service. Security Management Server failover is a feature that allows a backup Security Management Server to take over the role of the primary Security Management Server in case of failure or disaster. However, this feature requires manual intervention to activate the backup server and restore the database from a backup file. 

 The number of cores that can be used in a Cluster for Firewall-kernel on the new device with 4 cores is 4. Cluster is a feature that allows two or more Security Gateways to provide high availability and load balancing for network traffic. Firewall-kernel is a component of the Security Gateway that performs packet inspection according to security policies. The number of cores that can be used for Firewall-kernel in a Cluster depends on the number of cores available on each device in the Cluster. The Cluster will use the lowest common denominator of cores among all devices in the Cluster for Firewall-kernel. Therefore, if one device has 2 cores and another device has 4 cores, the Cluster will use 2 cores for Firewall-kernel on each device. However, if both devices have 4 cores, the Cluster will use 4 cores for Firewall-kernel on each device.

With SecureXL enabled, accelerated packets will pass through the following: Network Interface Card and the Acceleration Device. SecureXL is a technology that accelerates network traffic processing by offloading intensive operations from the Firewall kernel to a dedicated SecureXL device. Accelerated packets are packets that match certain criteria and can be handled by SecureXL without involving the Firewall kernel. These packets bypass the OSI Network Layer, OS IP Stack, and Check Point Firewall Kernel, and are processed directly by the Network Interface Card and the Acceleration Device. The other options are either incorrect or describe non-accelerated packets. 

The Access Control policy supports two policy layers. These are the Network layer and the Application & URL Filtering layer. The Network layer contains rules that control the network traffic based on the source, destination, service, and action. The Application & URL Filtering layer contains rules that control the application and web access based on the application, site category, and user identity12.

The Access Control policy can also use inline layers, which are sub-policies that are embedded within a rule. Inline layers allow more granular control over specific traffic or scenarios, such as VPN, Mobile Access, or different user groups13. However, inline layers are not considered as separate policy layers, but rather as extensions of the parent rule4.

Therefore, the correct answer is A. The Access Control policy supports two policy layers.

References:

1, Policy Layers in R80.x - Check Point CheckMates

2, Access Control policies, layers, and rules | Check Point Firewall …

3, Chapter 8: Introduction to Policies, Layers, and Rules - Check Point …

4, Creating an Access Control Policy - Check Point Software

One of the major features in R81 SmartConsole is concurrent administration. This feature allows multiple administrators to work on the same Security Policy simultaneously, without blocking each other or creating conflicts. Concurrent administration improves the efficiency and productivity of security management operations1.

However, not all of the options given are possible considering that AdminA, AdminB and AdminC are editing the same Security Policy. The correct answer is B. AdminA and AdminB are editing the same rule at the same time. This is not possible because concurrent administration uses a locking mechanism to prevent multiple administrators from modifying the same rule or object at the same time. When an administrator clicks on a rule or an object, it becomes locked and a lock icon appears next to it. The lock icon shows the name of the administrator who is working on that rule or object, and prevents other administrators from editing it until it is unlocked12.

Therefore, the other options are possible considering that AdminA, AdminB and AdminC are editing the same Security Policy. Option A is possible because a lock icon shows that a rule or an object is locked and will be available when the administrator who locked it finishes working on it or logs out of SmartConsole12. Option C is possible because a lock icon next to a rule informs that any administrator is working on this particular rule, and hovering over the lock icon will show the name of that administrator12. Option D is possible because AdminA, AdminB and AdminC are editing three different rules at the same time, which does not create any conflicts or blockages12.

According to the Check Point website, Capsule Connect and Capsule Workspace both offer secured connection for remote users who are using their mobile devices. However, there are differences between the two. For credential protection, Connect uses One-time Password login support and has no SSO support, whereas Workspace offers both One-Time Password and certain SSO login support. The other statements are either false or partially true. References: Capsule Connect and Capsule Workspace

The default commands that appear when right-clicking the IP address, source or destination, in an event in SmartEvent are ping, whois, nslookup, and Telnet. SmartEvent is a unified security event management solution that provides visibility, analysis, and reporting of security events across multiple Check Point products. SmartEvent has a feature that allows administrators to run common command line executables that can assist in investigating events. Right-clicking the IP address, source or destination, in an event provides a list of default and customized commands that can be executed on the IP address of the active cell. The default commands are ping, whois, nslookup, and Telnet. Ping is a command that tests the connectivity and latency between two hosts by sending packets and measuring the response time. Whois is a command that queries a database for information about the owner and registrar of a domain name or an IP address. Nslookup is a command that queries a DNS server for information about a domain name or an IP address, such as its IP address, name server, mail server, etc. Telnet is a command that establishes a remote connection to another host using the Telnet protocol. 

 To enable MTA (Mail Transfer Agent) functionality in the Security Gateway, the Threat Prevention Software Blade Package is required. The Threat Prevention Software Blade Package includes the Anti-Virus, Anti-Bot, and Threat Emulation blades, which can scan and hold external email with potentially malicious attachments. The MTA functionality allows the Security Gateway to act as an SMTP relay between the mail server and the Internet, and apply Threat Prevention policies to the email traffic. The other options are either not related or not sufficient to enable MTA functionality. R

 For Stateful Mode configuration, chain modules marked with 2 will not apply. Stateful Mode configuration is a feature that allows administrators to define how packets are processed by different firewall kernel modules in inbound and outbound directions. Chain modules are firewall kernel modules that perform various security functions, such as VPN, IPS, QoS, etc. Each chain module is associated with a key, which specifies the type of traffic applicable to the chain module. The key can be one of the following values: 0 for all packets, 1 for stateful packets, 2 for stateless packets, and 3 for no match packets. For Stateful Mode configuration, only chain modules with key 0 or 1 will apply, as they handle all packets or stateful packets. Chain modules with key 2 will not apply, as they handle stateless packets, which are not relevant for Stateful Mode configuration.

The formats in which Threat Emulation forensics reports can be viewed in are PDF, HTML, and XML. Threat Emulation is a feature that detects and prevents zero-day attacks by emulating files in a sandbox environment and analyzing their behavior. Threat Emulation generates forensics reports that provide detailed information about the emulated files, such as verdict, severity, activity summary, screenshots, network activity, registry activity, file activity, and process activity. These reports can be viewed in PDF, HTML, or XML formats from SmartConsole or SmartView.