Pass the Cisco CCNP Enterprise 300-430 Questions and answers with ValidTests

Before deploying an OEAP successfully, the IT administrator must configure the AP mode to FlexConnect and check the box for Office Extend AP ©, and configure the Primary Controller Name and Management IP address in the High Availability tab (E). These settings ensure that the OEAP can establish a connection to the WLC and function correctly in a remote user’s home. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

The default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller is EAP-FAST with CAPWAP DTLS (Option D). This method uses EAP-FAST for authentication within a secure tunnel established by Datagram Transport Layer Security (DTLS) over CAPWAP, which provides both security for authentication credentials and encryption for wireless management frames. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

Graphical user interface, application, Word Description automatically generated

When deploying Cisco Hyperlocation, it is important to enable the feature on both the wireless LAN controller and Cisco CMX to ensure proper functionality and data accuracy. Additionally, if the Cisco CMX server is a VM, a high-end VM is required to handle the processing demands of Cisco Hyperlocation deployments. References: The considerations for deploying Cisco Hyperlocation are covered in the certification guide, which emphasizes the importance of enabling the feature on both the controller and CMX, as well as the hardware requirements for the CMX server.

The true statement about the VideoStream/Multicast Direct feature is that each VideoStream client acknowledges receiving a video IP multicast stream. This feature enhances the reliability of IP multicast traffic over WLAN by using client acknowledgments to ensure delivery.

References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

For high availability configuration in Cisco CMX servers to work correctly, both primary and secondary servers must be identical in terms of installation type (physical or virtual) and size (resources allocated like CPU, RAM). If there is a mismatch in these aspects, it can lead to failure in setting up high availability as they need to synchronize data between them seamlessly. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

To separate different types of client authentication on a Cisco ISE deployment, policy sets and policy groups can be used. Policy sets allow the creation of policies based on conditions such as device type, while policy groups categorize clients for the application of specific policies. References: Cisco ISE documentation on policy sets and policy groups will have detailed information.

 When a network engineer receives an alert about a rogue AP and determines it is a security threat inside the campus, the fastest way to disable it is by updating its status in Cisco Prime Infrastructure to ‘contained’. This action instructs the system to prevent the rogue device from communicating with other devices on the network, effectively isolating it without having to physically locate or manually disable it. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

To enable VLAN tagging for wireless Identity-Based Networking on a WLAN, an engineer must enable AAA override, which allows for dynamic VLAN assignment. Additionally, the RADIUS server attributes need to be updated to include tunnel type 64, medium type 65, and tunnel private group type 81, which are necessary for VLAN tagging information. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

Mobile Device Management (MDM) integration with Cisco ISE increases security for lost devices by providing functions such as data wipe and jailbreak/root detection. Data wipe allows the remote erasure of sensitive information from lost devices, preventing unauthorized access. Jailbreak/root detection helps identify compromised devices that may bypass standard security measures, ensuring that they do not access network resources.