Refer to the exhibit. The network management system that is located at 192.168.10.10 and port 2000 must receive traps from the Cisco UCS Manager called UCSM. The community name is Cisco123! and the SNMP version must be the most secure.
These two commands have already been configured on Cisco UCSM.
UCS-A# scope monitoring
UCS-A/monitoring # enable snmp
Which command set completes the SNMP configu
Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements
The local update source for leaf switches must be loopback 1
The router ID must be the local loopback IP address
The external BGP connections must use a template name
Drag and drop the configuration snippets from the bottom to complete the configuration
An engineer configures a storage environment for a customer with high- security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)
Which Cisco Nexus Dashboard feature analyzes flow telemetry data that is streamed from a Cisco Nexus 9000 Series Switch?
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.
An engineer must tune an FCIP connection over WAN between two Cisco MDS 9000 Series Switches The customer has determined that default TCP parameters do not function for the link with 300 ms latency The TCP profile must
Modify the TCP retransmit time to satisfy the WAN latency.
Set the TCP keepalive timeout to 15 seconds.
Set the maximum number of TCP retransmissions to 5
Which command set meets the requirements?
Refer to the exhibit An engineer must restrict users assigned to the sangroup role on the Cisco MDS 9000 Series Switch from issuing commands
on VSANs 15 to 20 Which command must the engineer run to achieve
this objective?
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
• vNIC and vHBA profiles
• Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
Refer to the exhibit. The router R1 and N9K1 establish EIGRP neighborship. R1 is advertising network 10.1.1.15/32 to N9K1 and N9K2 and N9K3 are forming the OSPF neighborship over area 1 Which configuration prevents N9K3 from receiving external LSA for network 10.1.1.15/32?
A)
B)
C)
D)
An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements:
Use unicast for updates.
Use decentralized communication of updates.
Full adjacency between switches.
Which configuration is needed to meet these requirements?
