An engineer must perform an initial configuration of VXLAN Tunnel End-Point functionality on the Cisco Nexus 9000 Series platform All the necessary features are already enabled on the switch Which configuration set must be used to accomplish this goal?
An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements:
Use unicast for updates.
Use decentralized communication of updates.
Full adjacency between switches.
Which configuration is needed to meet these requirements?
A)
B)
C)
D)
An engineer must Implement a Python script to manage Cisco Application Centric Infrastructure (ACI) and endpoint groups. Which Python llorarles must be used to parse responses and send requests to Cisco ACI?
Refer to the exhibit An engineer must capture fiber channel traffic from the
server and the supervisory to the Cisco MDS 9000 Series Switch Fabric.
The traffic must be forwarded to the analyzer. Drag and drop the
code snippets from the right onto the blanks in the code on the
left to complete the configuration. Not all code snippets are used
Refer to the exhibit.
The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1. Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on inter- faces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?
Refer to the exhibit.
An engineer must monitor all LAN traffic on Fabric A from a blade server. Which source should be configured in the test-span monitor session to com- plete this task?
An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B. The vPCs are deployed as follows:
vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.
vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.
A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?
An engineer must replace a defective fabric interconnect with the same model. The system must be restored, including the database of locally created users. The equivalent Cisco UCS Manager software version must be used. Which backup type must be used to meet these requirements?
