Pass the EMC DCS-TA DES-1D12 Questions and answers with ValidTests

DELL PDF document about dynamic pools: h16289-dell_emc_unity-dynamic_pools.pdf

Page 20-21. The smallest RAID 5 stripe width the system supports is a 4+1. The smallest dynamic pool created with the RAID 5 4+1 configuration is 6 drives. The minimum drive count includes the number of drives specified in the stripe width, plus the hot spare capacity. The hot spare capacity is selected by the user at pool creation, and can either be set to 1 or 2 drives for every 32 drives in the pool.

The NAS server DNS can be enabled on the next page. For Directory Services, DNS configuration is required. Add at least one DNS server for the domain.

Both Dell PowerStore T and Dell PowerStore X support the 10 GbE BaseT optional I/O module card type. This card provides 10 Gbps Ethernet connectivity and can be used to connect the storage array to a network. The other options are not supported by both models. 25 GbE and 32 Gb Fibre Channel are generally faster and used for high-performance systems, while 8 Gb Fibre Channel is an older standard, and not supported by Dell PowerStore T and Dell PowerStore X.

 Before the write is acknowledged to the host in a Dell PowerStore 1000T, I/O is saved within the node DRAM memory. This is done to ensure that the write operation is successful and so that the data is safely stored in the event of a power failure. The data is then passed through the deduplication and compression logic, and finally stored on the nonvolatile media of the NVRAM drives.

The entire capacity of a particular drive size is only available when the drive count within the drive partnership group for the drive in question matches or exceeds the stripe width plus one drive. It is not recommended to mix different size drives of the same type for this reason, unless an adequate number of drives are available to meet or exceed the stripe width plus one drive requirement

h16289-dell_emc_unity-dynamic_pools.pdf - Page 18-19

When sizing a Dell Unity XT 480F using the System Design method, you can select one of four workload types and Drive count and RAID level. This workload type selection will take into account the specific IOPS and capacity requirements of the environment. The drive count and RAID level will determine the overall capacity and level of data protection required.

A storage container is used to present vVol storage from a PowerStore cluster to vSphere. vSphere mounts the storage container as a vVol datastore and makes it available for VM storage. When a PowerStore cluster is used to provide VM storage, user VMs should be provisioned on the vVol datastores. The default storage container is mounted automatically on the nodes of the cluster.

https://www.dell.com/support/manuals/en-us/unity-600f/unity_p_multiprotocol_infomod/security-on-file-system-objects?guid=guid-0d5c65ec-07a1-46f1-8936-a02f4c86b126 &lang=en-us

Access-based enumeration is the attribute that must be used at the share level to restrict the share content visibility of a Dell Unity file system based on the access rights. Access-based Enumeration (ABE) is a feature that allows you to hide files and folders from users who do not have the necessary permissions to access them. When ABE is enabled, users only see the files and folders that they have permission to access. This helps to prevent users from accidentally accessing data that they should not have access to, and it helps to maintain the security and integrity of the data on the file system.