Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with ValidTests

The Construction General Permit (CGP) for the Sustainable Sites Prerequisite, Construction Activity Pollution Prevention, must contain an installation plan for perimeter control. This is part of the Erosion and Sedimentation Control (ESC) Plan, which is designed to prevent loss of soil during construction by stormwater runoff and/or wind erosion, prevent sedimentation of storm sewer or receiving streams, and prevent polluting the air with dust and particulate matter1.

the local equivalent standard is more stringent than ASTM E1527-05

According to the LEED v4 Reference Guide for Building Design and Construction, a Phase I ESA is required for all projects, except for those located on previously developed land that has not been used for industrial, commercial, or agricultural purposes. The Phase I ESA must follow the ASTM E1527-05 standard or a local equivalent. However, if the local equivalent is more stringent than the ASTM standard, then the project must comply with the local equivalent. Therefore, if the new building project is located in a jurisdiction that has a more rigorous standard for Phase I ESA than ASTM E1527-05, then it must complete a new Phase I ESA, regardless of the previous ESA done for the certified facility.

An economic advantage of the infill site is that it reduces the need for new utility infrastructure. This is because the infill site is located within an existing urban area that already has access to water, sewer, electricity, and other utilities1. The developer can save on the costs of extending or installing new utility lines and services to the rural greenfield site, which may not have adequate or reliable utility infrastructure2. The other options are not economic advantages, but rather environmental benefits of the infill site. Protecting greenfields and farmland, preserving habitat and natural resources, and reducing potential damage to an existing stream are all positive outcomes of avoiding development on the rural greenfield site, but they do not directly translate into monetary savings for the developer3.

During the design phase documentation submission, the Materials and Resources (MR) Credit: Building Product Disclosure and Optimization - Environmental Product Declarations (EPDs) is reviewed. This credit encourages project teams to select products from manufacturers who provide transparency about their products' environmental impacts. EPDs are often part of the design documentation, as they influence material selection and project sustainability goals. Other PBT source reduction credits or raw material sourcing credits are typically more relevant in later phases, as they may involve construction processes and materials procurement rather than initial design specifications.

The document that details ideas, concepts, and criteria that are essential for a building's success is the Owner's Project Requirements (OPR). The OPR outlines the goals, expectations, and criteria from the owner’s perspective, setting a foundational vision for the project. It is used in LEED AP ID+C certification as a guideline for aligning design and construction decisions with the owner's objectives. The Basis of Design (BOD) then takes the OPR’s high-level goals and translates them into technical requirements. Both documents support integrated project delivery by helping ensure design aligns with the owner's goals, but the OPR specifically details what the owner considers essential.

The metal base, 20% of product by weight, which do not contain heavy metals and is not plated with hexavalent chromium, contributes toward Materials and Resources Credit, Furniture and Medical Furnishings. This is because it meets the criteria of Option 1: Minimal Chemical Content, which requires that all components that constitute at least 5%, by weight, of a furniture or medical furnishing assembly must contain less than 100 ppm of at least four of the five chemical groups listed in the option. The other portions of the product either do not meet the 5% weight threshold (wheels), or contain chemicals that are restricted by Option 1 (fabric, armrests).

For the Water Efficiency (WE) Prerequisite: Outdoor Water Use Reduction, athletic fields and playgrounds are considered special landscape areas and can be optionally included in landscape area calculations. This flexibility (D) allows teams to decide based on the unique water needs of these areas, as athletic fields often require extensive watering for maintenance. LEED recognizes these areas’ high water demand and provides an exception, acknowledging the potential challenges in reducing water for such intensive-use spaces.

While increased ventilation improves indoor air quality, it can also lead to higher energy consumption, impacting LEED BD+C Energy and Atmosphere (EA) Credit: Optimize Energy Performance.

More ventilation requires more heating/cooling energy, which can increase energy use and reduce overall energy efficiency.

This can lower the points earned for energy optimization, since LEED rewards projects that minimize energy consumption.

Other credits (Options A, B, and D) are not directly affected by increased ventilation rates.

Energy performance is negatively impacted when additional ventilation leads to increased HVAC energy demand.

(Source: Official LEED BD+C Reference Manual)

The Sustainable Sites (SS) Credit: Rainwater Management (A) would be affected by the slope analysis results. Slopes, especially those near water bodies, can significantly impact stormwater runoff volume and patterns. Managing runoff in sloped areas is crucial to minimize erosion, reduce pollutants, and protect nearby water bodies. This credit aims to reduce runoff volume and improve water quality by implementing effective rainwater management strategies based on site conditions. Other credits, like Environmental Site Assessment (B) or Sensitive Land Protection (C), don’t focus on runoff management.

According to the LEED v4: Building Design + Construction Guide, the owner or an owner’s representative must be a member of the integrated project team for the Integrative Process Prerequisite, Integrative Project Planning and Design. The owner or an owner’s representative is responsible for establishing the project’s vision, goals, budget, and schedule, as well as defining the owner’s project requirements (OPR) and participating in the design charrettes and reviews1. The owner or an owner’s representative also plays a key role in ensuring the continuity and alignment of the project’s performance and environmental objectives throughout all phases of the project1.

The other choices are not mandatory members of the integrated project team, although they may be involved in the integrative process depending on the project’s scope and needs. The general contractor is typically hired after the design phase and may not be involved in the predesign and schematic design analyses required by the prerequisite1. A LEED AP is a professional who has demonstrated knowledge and experience in applying the LEED rating system, but is not required to be part of the integrated project team, although it is recommended and rewarded by the LEED credit, Integrative Process1. The project’s mechanical engineer is one of the possible design consultants who may contribute to the integrative process, especially for the energy-related systems analysis, but is not required to be part of the integrated project team1.