Pass the ISTQB Foundation Level ISTQB-CTFL Questions and answers with ValidTests

An incident is any event that occurs during testing that requires investigation. An incident management tool is a software tool that supports recording and tracking incidents throughout their life cycle. A QA manager of a start-up company needs to implement within a week a low cost incident management tool. The best option for this case is to manage the incidents in a spreadsheet posted on the intranet. This option has several advantages over other options:

It is low cost, as it does not require purchasing any additional software or hardware.

It is easy to implement within a week, as it does not require installing or configuring any complex software or hardware.

It is accessible and transparent, as it can be viewed and updated by anyone who has access to the intranet.

It is structured and organized, as it can store and display various information about incidents, such as identifier, summary, description, severity, priority, status, resolution, etc. The other options are not suitable for this case, as they have several disadvantages over the chosen option:

Documenting incidents on a large board in the lab is not a good option, as it is not accessible or transparent to anyone who is not physically present in the lab. It is also not structured or organized, as it may not store or display all the necessary information about incidents.

Purchasing and deploying an incident management tool is not a good option, as it is not low cost or easy to implement within a week. It may require spending a significant amount of money and time on acquiring, installing and configuring the software or hardware.

Managing the incidents through emails and phone calls is not a good option, as it is not structured or organized. It may lead to confusion, inconsistency or loss of information about incidents. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 3, page 32-33.

 The following should be included in a test status report: total number of open and closed defects, actual effort spent, and number of executed, failed, and blocked tests. A test status report is a document that provides information on the results and status of testing activities for a given period or phase. A test status report should include information that is relevant, accurate, and timely for the intended audience and purpose. Some of the information that should be included in a test status report are: total number of open and closed defects, which can indicate the defect trend and defect density of the software product; actual effort spent, which can indicate the productivity and efficiency of the testing process; number of executed, failed, and blocked tests, which can indicate the test progress and test coverage of the software product. The following should not be included in a test status report: estimation details, defect reports, and impact analysis. Estimation details are not part of a test status report, but rather part of a test plan or a test estimation document. Estimation details provide information on the expected time, resources, and costs for testing activities, not on the actual results or status of testing activities. Defect reports are not part of a test status report, but rather separate documents that provide detailed information on individual defects found during testing. Defect reports include information such as defect description, defect severity, defect priority, defectstatus, defect resolution, etc. Defect reports can be referenced or summarized in a test status report, but not included in full. Impact analysis is not part of a test status report, but rather part of a risk assessment or prioritization process. Impact analysis provides information on the potential effects or consequences of a change or a defect on the software product or project. Impact analysis can be used to evaluate the amount or scope of testing to be performed, but not to report the results or status of testing activities. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 141.

This answer is correct because the test procedures of all test cases that have been executed are not a typical content of a test completion report for a test project. A test completion report is a document that summarizes the test activities and results at the end of a test project. It usually includes information such as the test objectives, scope, approach, resources, schedule, results, deviations, issues, risks, lessons learned, and recommendations for improvement. The test procedures of all test cases that have been executed are part of the test documentation, but they are not relevant for the test completion report, as they do not provide a high-level overview of the test project outcomes and performance. References: ISTQB Foundation Level Syllabus v4.0, Section 2.5.3.2

A failure is an event in which a component or system does not perform a required function within specified limits1. A requirement is a condition or capability needed by a user to solve a problem or achieve anobjective2. In this case, the requirement is that the diagnostics tests should execute in less than 2 seconds. Therefore, any event that violates this requirement is a failure. The only option that clearly violates this requirement is B. The diagnostic tests take toomuch time to execute. If the diagnostic tests take more than 2 seconds to complete, then they do not meet the specified limit and thus fail. The other options are not necessarily failures related to the specified requirement. Option A. The diagnostic tests fail to start after a system reset is a failure, but not related to the time limit. It is related to the functionality of the self-diagnostics module. Option C. The diagnostic tests that measure the speed of the memory, fail is also a failure, but not related to the time limit. It is related to the accuracy of the memory tests. Option D. The diagnostic tests fail due to incorrect implementation of the test code is also a failure, but not related to the time limit. It is related to the quality of the test code. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Requirements Engineering Fundamentals.

The fundamental testing process includes activities that are directly related to the planning, preparation, execution, and evaluation of tests, as well as the closure activities of the testing phase. Option D, "Build release and maintenance," falls outside the scope of the fundamental testing process as it relates more to software development and operations rather than specific testing activities. Options A, "Archiving automation code," B, "Test status reporting," and C, "Test process improvement," are all activities that can be part of or associated with the fundamental testing process. Archiving automation code is part of test closure, test status reporting is part of test monitoring and control, and test process improvement can be an outcome of test closure activities.

When developers are trying to identify and remove a defect, they need clear information on what went wrong and what was expected. The items that will be most useful to developers in this context are the expected results (item 1), the actual results (item 2), and a description of the defect including steps to reproduce, screenshots, and database dumps (item 5). This information helps developers understand the nature of the defect and provides the necessary details to reproduce and diagnose the issue effectively.References:

ISTQB Certified Tester Foundation Level Syllabus v4.0, Section 5.5.1.

Checklist-based testing involves using checklists that contain items, such as potential test conditions, that should be tested. These checklists are often based on insights into what is important to the user, potential areas where software might fail, and specific aspects that need to be tested. It provides a structured yet flexible approach to testing, ensuring key areas are covered while allowing testers to use their experience and understanding of the system. Checklist-based testing is not limited to non-functional testing but can be applied to various types of testing, including functional testing.References:

ISTQB Certified Tester Foundation Level Syllabus v4.0, Section 4.4.5.

You should choose a test technique because you need to match the way you test to the content of the product under test. A test technique is a method or process for deriving and selecting test cases based on some criteria or rules. Different test techniques are suitable for different types of software products, depending on their characteristics, functionalities, requirements, specifications, risks, etc. Choosing a test technique helps to ensure that the test cases are relevant, effective, and efficient for the product under test. The other options are not correct reasons to choose a test technique. Time constraints are not a factor for choosing a test technique, but rather for prioritizing or optimizing testing activities. Covering the full scope of the product’s functionality is not a guarantee of choosing a test technique, but rather a goal of testing. Choosing a test technique is not a common practice in software testing, but rather a professional skill and responsibility. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 31.

A dynamic analysis tool is a tool that performs analysis of a software product based on its behavior during execution. A dynamic analysis tool can monitor various aspects of a program’s run-time performance, such as memory usage, CPU load, response time, or resource leaks. A dynamic analysis tool can monitor the allocation, use and de-allocation of memory during run-time of a program, which can help detect defects such as memory leaks, buffer overflows, or memory corruption. A dynamic analysis tool cannot provide support for traceability of tests, test results and incidents to source documents, as this is a function of a test management tool. A dynamic analysis tool cannot execute programs step-by-step in order to reproduce failures and find corresponding defects, as this is a function of a debugging tool. A dynamic analysis tool cannot provide support for release of baselines consisting of configuration items, as this is a function of a configuration management tool. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 6, page 56-57.

This answer is correct because configuration management is a process of establishing and maintaining consistency of a product’s performance, functional, and physical attributes with its requirements, design, and operational information throughout its life. Configuration management helps ensure that all relevant project documentation and software items are uniquely identified in all their versions and therefore can be unambiguously referenced in test documentation. This supports testing by providing traceability, consistency, and control over the test artifacts and the software under test. References: : ISTQB Glossary of Testing Terms v4.0, : ISTQB Foundation Level Syllabus v4.0, Section 2.2.2.2