Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with ValidTests

To evaluate the Location and Transportation (LT) Credit: Reduced Parking Footprint, the project team should be aware of the minimum number of parking spaces required by the zoning code (D). This credit aims to reduce the environmental impact of parking by minimizing the number of spaces provided, encouraging alternative transportation methods. Knowledge of local parking minimums helps the team ensure compliance with LEED while avoiding excess parking, which can contribute to urban sprawl and the heat island effect. Design guidelines and building code standards are not directly relevant to this credit.

Plug-in task lighting is considered as furniture and is not included in the installed lighting power calculations for Energy and Atmosphere Prerequisite, Minimum Energy Performance. It is also not required to comply with the lighting control requirements of ASHRAE 90.1-2010. However, it can be used to satisfy the individual control requirement of Indoor Environmental Quality Credit, Interior Lighting, Option 1. References:

LEED v4 for Building Design and Construction, p. 361

LEED v4 for Building Design and Construction, p. 6012

ASHRAE 90.1-2010, Section 9.1.13

Detailed Explanation:

A public park qualifies as a diverse use under LEED because it is a publicly accessible facility that serves the community. LEED defines diverse uses as those that provide amenities, services, or public resources within walking distance, promoting walkable neighborhoods and reducing reliance on vehicles.

The LEED Platinum certification requires the project to achieve exemplary performance in at least one credit that allows it, as specified in the LEED Reference Guide1. One of the credits that meets this criterion is the Indoor Environmental Quality Credit, which focuses on providing healthy and comfortable indoor environments for occupants. The credit has two options: Quality Views and Enhanced Commissioning. Quality Views requires the project to have windows that provide views of natural scenery or water bodies, which can enhance the well-being and satisfaction of occupants. Enhanced Commissioning requires the project to have a comprehensive commissioning plan that ensures all systems are properly installed, tested, and operated before occupancy. Both options can help reduce energy consumption, improve indoor air quality, and create a positive sensory experience for occupants.

Xeriscaping is a landscaping method that reduces water demand by using plants that are adapted to dry climates, mulching the soil to retain moisture, and minimizing the amount of lawn and other turf areas. Xeriscaping can help save water, money, and energy, as well as improve the health of the soil and the environment.

For the Materials and Resources Credit, Building Life-Cycle Impact Reduction, Option 2. Renovation of Abandoned or Blighted Buildings, up to 25% of the building surface area may be excluded from the credit calculation due to deterioration or damage1.

The Acoustic Performance credit under the LEED BD+C: Healthcare rating system addresses the acoustic environment in healthcare spaces. It requires strategies that reduce noise levels, control background noise, and provide sound privacy. The documents that would best inform this decision are:

Airport flyover maps: These can help determine the level of external noise intrusion into the building, which can affect the acoustic environment.

Mechanical plans: These can provide information about the location and type of mechanical equipment, which can be a source of internal noise.

Wall sections: These can provide information about the construction of the walls, including materials and assemblies, which can affect sound transmission between spaces1.

To achieve the maximum number of Energy and Atmosphere points, the project team must include an energy modeler and a commissioning agent. The energy modeler is responsible for performing the whole-building energy simulation that demonstrates the energy performance improvement over the baseline building, which is required for Energy and Atmosphere Prerequisite 2 and Credit 11. The commissioning agent is responsible for verifying that the building’s energy systems are installed, calibrated, and perform according to the owner’s project requirements, basis of design, and construction documents, which is required for Energy and Atmosphere Prerequisite 1 and Credit 31. The commissioning agent also ensures that the renewable energy systems are properly integrated and functioning2. The contractor and the construction manager are not directly involved in the energy modeling or commissioning process, although they must follow the design specifications and coordinate with the commissioning agent. The facilities manager is not required for achieving the Energy and Atmosphere points, although they may benefit from the training and documentation provided by the commissioning agent. References:

LEED v4 for Building Design and Construction, p. 361

Understanding Integrative Design in LEED v4, p. 92

The most likely group of documents to support both Indoor Environmental Quality Credit, Thermal Comfort, and Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control is C, lighting plans, surveys of occupants, sequence of operations.

Lighting plans show the layout and type of lighting fixtures, as well as the lighting controls, such as dimmers, timers, occupancy sensors, or daylight sensors. Surveys of occupants provide feedback on the satisfaction and comfort level of the building users regarding the thermal and lighting conditions. Sequence of operations describes how the mechanical and lighting systems operate and respond to different scenarios, such as occupancy, temperature, or daylight levels.

These documents can demonstrate that the project meets the requirements for both credits, which are:

For Thermal Comfort, the project must design the HVAC systems and the building envelope to meet the requirements of ASHRAE Standard 55-2010, Thermal Environmental Conditions for Human Occupancy, or a local equivalent, and provide individual thermal comfort controls for at least 50% of the individual occupant spaces, and group thermal comfort controls for all shared multi-occupant spaces1.

For Interior Lighting, Option 1. Lighting Control, the project must provide individual lighting controls that enable adjustments to suit individual task needs for at least 90% of the individual occupant spaces, and provide lighting system controls for all shared multi-occupant spaces that allow occupants to adjust the lighting to meet group needs and preferences2.

The other groups of documents are less likely to support both credits, because:

Architectural floor plans, mechanical plans, and lamp specifications do not show the lighting controls or the occupant feedback.

Photometric plans, mechanical schedules, and lamp specifications do not show the thermal comfort design or the occupant feedback.

Surveys of occupants, photometric plans, and mechanical schedules do not show the lighting controls or the thermal comfort design.

Discussing the project goals to help identify the credits and options that the team should attempt is an example of developing the LEED Scorecard. The LEED Scorecard is a tool that shows the potential points that a project can achieve under each credit category of the LEED rating system1. Developing the LEED Scorecard involves selecting the most appropriate credits and options based on the project’s goals, location, budget, and design2. The scorecard helps the project team track their progress and prioritize their actions throughout the design and construction process1. References:

LEED scorecard | U.S. Green Building Council

LEED v4: Building Design + Construction Guide - U.S. Green Building Council