Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with ValidTests

Exemplary performance credits are one of the options to earn innovation points under the LEED v4.1 rating system. They are typically awarded for achieving double the credit requirements or the next incremental percentage threshold of an existing LEED v4.1 prerequisite or credit that allows exemplary performance. For example, to earn an exemplary performance point for the Energy and Atmosphere credit Optimize Energy Performance, the project must demonstrate a percentage improvement in the proposed building performance rating compared to the baseline building performance rating per ASHRAE 90.1-2010 by at least 12 percentage points for new construction, or by at least 16 percentage points for major renovations.

Sustainable Sites (SS) Credit: Light Pollution Reduction addresses light trespass, glare, and skyglow, ensuring that a project:

Minimizes unnecessary outdoor lighting to prevent disruption to surrounding properties.

Uses full-cutoff fixtures to direct light downward and reduce nighttime skyglow.

Follows lighting zone guidelines based on project location.

This promotes dark-sky compliance and reduces light pollution, benefiting ecosystems and human health.

(Source: Official LEED BD+C Reference Manual)

Detailed Explanation:

ISO 14040/44 LCA information is not a substitute for an EPD in LEED documentation. To meet the requirements of the Building Product Disclosure and Optimization credit, an EPD must comply with specific LEED-recognized standards. If the manufacturer cannot provide an EPD, the project team should consider sourcing a comparable product from another manufacturer that has an EPD to maintain compliance.

The make and model of fixtures is required in determining the baseline for the Water Efficiency Prerequisite, Indoor Water Use Reduction. This information is used to calculate the baseline water consumption of the building, which is then compared to the proposed water use to determine the percentage reduction.

The Minimum Program Requirements (MPRs) for LEED certification are:

MPR 1: Must be in a permanent location on existing land

MPR 2: Must use reasonable LEED boundaries

MPR 3: Must comply with project size requirements

Option A does not meet MPR 1 because it is located on a previously undeveloped site, which is not considered existing land. Option B does not meet MPR 3 because it is a parking garage, which is excluded from LEED certification unless it is part of a larger project. Option C does not meet MPR 1 because it is a mobile clinic, which is not considered permanent. Option D meets all the MPRs because it is a permanent building on existing land, it has reasonable LEED boundaries, and it meets the minimum gross floor area of 1,000 ft2 (93 m2) for BD+C projects.

Detailed Explanation:

Incorporating rooftop solar panels addresses glare concerns effectively by replacing reflective surfaces with photovoltaic modules while simultaneously supporting LEED credits for renewable energy production. This strategy avoids negative impacts on other credits, such as Heat Island Reduction or Energy Performance, and contributes positively to overall project sustainability.

According to the LEED v4: Building Design + Construction Guide, the Location and Transportation Credit, Access to Quality Transit has two options: Option 1. Transit-Served Location and Option 2. Transit Service Quality. Option 1 can earn 1 to 4 points depending on the percentage of functional entries within walking distance of transit stops or stations. Option 2 can earn 1 point if the project meets the minimum weekday and weekend headways for bus, streetcar, or informal transit stops, or rail stations or ferry terminals. The maximum number of points a project can achieve under this credit is 4 points by meeting both options1. References: LEED v4: Building Design + Construction Guide, Location and Transportation Credit, Access to Quality Transit, Requirements1

A split review is an optional review process that allows project teams to submit the design and construction portions of their projects separately. This can help teams determine if the project is on track to achieve LEED certification at its preferred level, and identify any issues or clarifications needed before the final review. A split review also reduces the documentation burden and review time for the construction review12.

The Consortium for Energy Efficiency (CEE) Tier 3A standard applies to water-efficient appliances, such as dishwashers, clothes washers, and commercial kitchen equipment. It is recognized in LEED BD+C for improving indoor water efficiency.

CEE Tier 3A focuses on high-efficiency appliances that meet stringent water and energy performance requirements.

These appliances contribute to Water Efficiency (WE) credits in LEED by reducing potable water consumption.

Other options are unrelated to standard appliances for indoor water reduction:

GreenSeal pertains to environmental product certifications, including low-VOC materials.

ASHRAE 62.1-2010 relates to ventilation and indoor air quality standards.

ISO 14044-2006 addresses life cycle assessment (LCA) methodologies.

(Source: Official LEED BD+C Reference Manual)

For the Water Efficiency (WE) Prerequisite: Indoor Water Use Reduction, the kitchen sink is included in fixture calculations as it directly consumes water. The dishwasher must meet ENERGY STAR® standards or equivalent performance requirements to ensure water efficiency, though it is not included in the fixture calculations. The coffee machine, as a minor appliance with minimal water use, is not included in this prerequisite (B). This approach aligns with LEED’s focus on larger water-consuming fixtures while ensuring energy and water-efficient appliances where relevant.