What are two characteristics of an SSID? (Choose Two)
Which goal is achieved by the implementation of private IPv4 addressing on a network?
Refer to the exhibit.
Refer to the exhibit. The IPv6 address for the LAN segment on router R1 must be configured using the EUI-64 format. When configured which ipv6 address is produced by the router?
Which WPA3 enhancement protects against hackers viewing traffic on the Wi-Fi network?
A network administrator needs to aggregate 4 ports into a single logical link which must negotiate layer 2 connectivity to ports on another switch. What must be configured when using active mode on both sides of the connection?
Refer to the exhibit.
With which metric was the route to host 172.16.0.202 learned?
Which output displays a JSON data representation?
When configuring a WLAN with WPA2 PSK in the Cisco Wireless LAN Controller GUI, which two formats are available to select? (Choose two)
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Refer to the exhibit.
A static route must be configured on R14 to forward traffic for the 172 21 34 0/25 network that resides on R86 Which command must be used to fulfill the request?
Why was the RFC 1918 address space defined?
An administrator must secure the WLC from receiving spoofed association requests. Which steps must be taken to configure the WLC to restrict the requests and force the user to wait 10 ms to retry an association request?
Refer to the exhibit.
Which two commands were used to create port channel 10? (Choose two )
An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?
What is a characteristic of private IPv4 addressing?
In software-defined architecture, which place handles switching for traffic through a Cisco router?
Refer to the exhibit.
How many objects, Keys and JSON list values are present?
Refer to the exhibit.
An IP subnet must be configured on each router that provides enough addresses for the number of assigned hosts and anticipates no more than 10% growth for now hosts. Which configuration script must be used?
A)
B)
C)
D)
A network administrator enabled port security on a switch interface connected to a printer. What is the next configuration action in order to allow the port to learn the MAC address of the printer and insert it into the table automatically?
Refer to the exhibit.
An engineer is bringing up a new circuit to the MPLS provider on the Gi0/1 interface of Router1 The new circuit uses eBGP and teams the route to VLAN25 from the BGP path What s the expected behavior for the traffic flow for route 10.10.13.0/25?
Which 802.11 frame type is Association Response?
Refer to the exhibit.
All interfaces are in the same VLAN. All switches are configured with the default STP priorities. During the STP electronics, which switch becomes the root bridge?
Refer to the exhibit.
Rapid PVST+ mode is on the same VLAN on each switch. Which switch becomes the root bridge and why?
What are two facts that differentiate optical-fiber cabling from copper cabling? (Choose two.)
Refer to the exhibit.
The nip server 192.168.0.3 command has been configured on router 1 to make it an NTP client of router 2. Which command must be configured on router 2 so that it operates in server-only mode and relies only on its internal clock?
Refer to the exhibit.
A network engineer configures the Cisco WLC to authenticate local wireless clients against a RADIUS server Which task must be performed to complete the process?
Which cipher is supported for wireless encryption only with the WPA2 standard?
Refer to the exhibit.
What is the issue with the interface GigabitEthernet0/0/1?
Refer to the exhibit.
The show ip ospf interface command has been executed on R1 How is OSPF configured?
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Drag and drop the TCP/IP protocols from the left onto the transmission protocols on the right
Refer to the exhibit.
Which per-hop QoS behavior is R1 applying to incoming packets?
Router A learns the same route from two different neighbors, one of the neighbor routers is an OSPF neighbor and the other is an EIGRP neighbor. What is the administrative distance of the route that will be installed in the routing table?
What is a capability of FTP in network management operations?
Which design element is a best practice when deploying an 802.11b wireless infrastructure?
Refer to me exhibit.
Which action is taken by the router when a packet is sourced from 10.10.10.2 and destined for 10.10.10.16?
What is the function of a controller in controller-based networking?
What is the expected outcome when an EUI-64 address is generated?
What are two similarities between UTP Cat 5e and Cat 6a cabling? (Choose two.)
Which technology is appropriate for communication between an SDN controller and applications running over the network?
Which command prevents passwords from being stored in the configuration as plain text on a router or switch?
Refer to the exhibit.
Drag and drop the networking parameters from the left onto the correct values on the right.
Which action does the router take as rt forwards a packet through the network?
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two)
What does physical access control regulate?
What is used to identify spurious DHCP servers?
What is the purpose of classifying network traffic in QoS?
Which command configures the Cisco WLC to prevent a serial session with the WLC CLI from being automatical togged out?
Which enhancements were implemented as part of WPA3?
Refer to Exhibit.
An engineer is configuring the NEW York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two)
