Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
Refer to the exhibit.
Router R2 is configured with multiple routes to reach network 10 1.1 0/24 from router R1. What protocol is chosen by router R2 to reach the destination network 10.1 1 0/24?
Refer to the exhibit.
For security reasons, automatic neighbor discovery must be disabled on the R5 Gi0/1 interface. These tasks must be completed:
• Disable all neighbor discovery methods on R5 interface GiO/1.
• Permit neighbor discovery on R5 interface GiO/2.
• Verify there are no dynamically learned neighbors on R5 interface Gi0/1.
• Display the IP address of R6*s interface Gi0/2.
Which configuration must be used?
Refer to the exhibit.
Shortly after SiteA was connected to SiteB over a new single-mode fiber path users at SiteA report intermittent connectivity issues with applications hosted at SiteB What is the cause of the intermittent connectivity issue?
A user configured OSPF in a single area between two routers A serial interface connecting R1 and R2 is running encapsulation PPP By default which OSPF network type is seen on this interface when the user types show ip ospf interface on R1 or R2?
Which network plane is centralized and manages routing decisions?
What are two reasons that cause late collisions to increment on an Ethernet interface? (Choose two)
What is a similarly between 1000BASE-LX and 1000BASE-T standards?
Where does a switch maintain DHCP snooping information?
What role does a hypervisor provide for each virtual machine in server virtualization?
What Is the path for traffic sent from one user workstation to another workstation on a separate switch In a Ihree-lter architecture model?
An engineer requires a scratch interface to actively attempt to establish a trunk link with a neighbor switch. What command must be configured?
Drag the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Refer to the exhibit.
Which route does R1 select for traffic that is destined to 192 168.16.2?
What is a characteristic of spine-and-leaf architecture?
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN Controller is true?
Which IPv6 address type provides communication between subnets and is unable to route on the Internet?
Drag and drop the application protocols from the left onto the transport protocols that it uses on the right
Where is the interface between the control plane and data plane within the software-defined architecture?
Using direct sequence spread spectrum, which three 2.4-GHz channels are used to limit collisions?
When a WPA2-PSK WLAN is configured in the wireless LAN Controller, what is the minimum number of characters that in ASCll format?
What are two characteristics of a public cloud Implementation? (Choose two.)
Refer to the exhibit.
A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?
Refer to the exhibit.
A network administrator has been tasked with securing VTY access to a router. Which access-list entry accomplishes this task?
How does the dynamically-learned MAC address feature function?
Which command must be entered when a device is configured as an NTP server?
Refer to the exhibit.
An engineer must configure GigabitEthernet1/1 to accommodate voice and data traffic Which configuration accomplishes this task?
An engineer needs to configure LLDP to send the port description time length value (TLV). What command sequence must be implemented?
An organization secures its network with multi-factor authentication using an authenticator app on employee smartphone. How is the application secured in the case of a user’s smartphone being lost or stolen?
What is the benefit of configuring PortFast on an interface?
How do AAA operations compare regarding user identification, user services and access control?
Which function does an SNMP agent perform?
Refer to the exhibit.
What action establishes the OSPF neighbor relationship without forming an adjacency?
A network administrator must to configure SSH for remote access to router R1 The requirement is to use a public and private key pair to encrypt management traffic to and from the connecting client.
Which configuration, when applied, meets the requirements?
Refer to the exhibit.
An engineer booted a new switch and applied this configuration via the console port. Which additional configuration must be applied to allow administrators to authenticate directly to enable privilege mode via Telnet using a local username and password?
Refer to the exhibit.
Which IPv6 configuration is required for R17 to successfully ping the WAN interface on R18?
A)
B)
C)
D)
Refer to the exhibit.
Drag and drop the networking parameters from the left onto the correct values on the right.
The service password-encryption command is entered on a router. What is the effect of this configuration?
A network engineer must create a diagram of a multivendor network. Which command must be configured on the Cisco devices so that the topology of the network can be mapped?
Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two)
Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. what is the reason for the problem?
Which result occurs when PortFast is enabled on an interface that is connected to another switch?
Refer to the exhibit.
An access list is created to deny Telnet access from host PC-1 to RTR-1 and allow access from all other hosts A Telnet attempt from PC-2 gives this message:"% Connection refused by remote host" Without allowing Telnet access from PC-1, which action must be taken to permit the traffic?
Which type of IPv6 address is publicly routable in the same way as IPv4 public address?
Which technology must be implemented to configure network device monitoring with the highest security?
An engineer configured an OSPF neighbor as a designated router. Which state verifies the designated router is in the proper mode?
Refer to the exhibit.
Which route type is configured to reach the internet?
Which action is taken by a switch port enabled for PoE power classification override?
Refer to the exhibit.
The New York router is configured with static routes pointing to the Atlanta and Washington sites. Which two tasks must be performed so that the Serial0/0/0 interfaces on the Atlanta and Washington routers can reach one another?
(Choose two.)
