Pass the Huawei HCIA-Datacom H12-811_V1.0 Questions and answers with ValidTests

Detailed Explanation:The Type/Length field value of 0x0800 indicates that the upper-layer protocol is IPv4. However, the length of the IPv4 header can range from 20 to 60 bytes, not the length of the entire upper-layer packet. The field refers to the type of the encapsulated protocol, and the length is not constrained to the header alone​​.

The wildcard mask 0.0.254.255 means:

The first and third octets are checked exactly.

The second and fourth octets can vary.

This results in a match for IPs in the range 10.0.2.0 - 10.0.2.255.

Only option D (10.0.2.1) falls within this range.

Thus, the correct answer is D (10.0.2.1).

Detailed Explanation:The ACL (Access Control List) configuration only permits IP address 172.16.105.2. By applying this ACL to the Telnet server, only devices from this IP can establish a Telnet connection, while all others are denied access. (Reference: HCIA-Datacom Training Material, ACLs and Telnet Access Control)

The VRP platform does not support configuration through FTP. Configuration methods typically include using a console port, Telnet, or SSH, allowing for direct access to the device configuration. FTP is generally used for file transfer, not direct configuration, and therefore is not a supported method for configuring a router​.

An ARP (Address Resolution Protocol) packet includes several fields essential for mapping IP addresses to MAC addresses. The fields include:

Source Protocol Address: Identifies the IP address of the requesting device.

Source Hardware Address: Contains the MAC address of the source.

Hardware Type: Indicates the hardware type, typically Ethernet.

Operation Code: Specifies the operation (request or reply). These fields collectively allow devices to resolve IP addresses to physical MAC addresses, enabling direct communication within the local network​.

Comprehensive Explanation: DHCP (Dynamic Host Configuration Protocol) involves several packet types used in the process of assigning IP addresses. These include:

DHCP Discover: The client broadcasts this packet to find available DHCP servers.

DHCP Offer: The DHCP server responds with an IP address offer to the client.

DHCP Request: The client requests the offered IP address from the server.There is no such thing as a "DHCP Rollover" packet. The process continues with the DHCP server sending an acknowledgment to finalize the IP address lease.

Advanced ACLs (3000-3999) allow filtering based on:

Source and Destination IPs

Protocol Number (C - Correct)

Destination Port Number (B - Correct)

Time-range (D - Correct)

A (Incorrect): ACLs do not filter based on the source interface, but rather on IPs, ports, and protocols.

Thus, the correct answer is A (Source Interface).

Understanding Trunk Ports:

Trunk ports carry traffic from multiple VLANs.

Native VLAN (PVID) frames are sent untagged on the trunk.

Breakdown of Configuration:

port link-type trunk → Interface operates as a trunk.

port trunk pvid vlan 10 → Sets VLAN 10 as the native VLAN.

port trunk allow-pass vlan 10 20 30 40 → Allows traffic from VLANs 10, 20, 30, and 40.

Conclusion:

Since VLAN 10 is the PVID (native VLAN), frames from this VLAN are sent untagged.

Correct answer is A (VLAN 10).

References: HCIA-Datacom V1.0 Certification Guide, Chapter 4: VLANs and Trunking.

In one-arm routing (or router-on-a-stick) mode, a single physical link (with sub-interfaces) can carry traffic between multiple VLANs, reducing the number of physical links required. This approach minimizes cabling and port usage while still enabling inter-VLAN communication. However, it does not inherently reduce IP address usage, routing table entries, or the number of devices required​.

In OSPF, a router in the backbone area (Area 0) has a full LSDB (Link-State Database) for all routers within the OSPF domain. This comprehensive LSDB allows the backbone area to communicate effectively with other areas by providing routing information about all connected OSPF routers, facilitating inter-area routing​.