Pass the Cisco CCNP Service Provider 350-501 Questions and answers with ValidTests

In the given scenario, the goal is to restrict users on the network between R1 and R2 from accessing the external network through R5, while still allowing them access to all resources within the administrative domain. The correct approach is to configure an Access Control List (ACL) that permits traffic to all internal networks and denies traffic to any external address. This ACL should be applied to the R2 interface that connects to R1 in the ingress direction. By doing so, traffic originating from users between R1 and R2 destined for external networks will be blocked, while internal traffic will be allowed.

References: This explanation is derived from the Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) study materials, which cover the configuration and application of ACLs in a service provider network environment.

The RPL script in the image is used to filter BGP routes based on the AS path. The script includes a condition that checks if the AS path contains ‘7077’ using a regular expression (ios-regex ‘777$’). If this condition is met, the route is passed; otherwise, it would be denied by default. Therefore, this script allows routes from AS 7077 and denies others.

References := For specific references, please consult the Implementing and Operating Cisco Service Provider Network Core Technologies source book or study guide, as I am unable to provide direct links or access content from external websites.

 In OSPF, for two routers to form an adjacency, they must have matching MTU sizes on their connecting interfaces. If the MTUs are mismatched, OSPF adjacency will be stuck in the EXSTART/EXCHANGE state because OSPF hello packets will not be exchanged between the routers. In this case, both routers R1 and R2 are stuck in EXCHANGE/EXSTART state due to mismatched MTU sizes as indicated in the exhibit. References: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) - Cisco

To secure REST APIs, a network administrator should ensure that user sessions are authenticated and that the appropriate privilege level is provided for each user. This means that each API request should come with authentication credentials, and the server should validate these credentials for every request. This approach helps to maintain the stateless nature of REST APIs and ensures that only authorized users can access or modify resources. References: Best practices for securing REST APIs include using HTTPS, token-based authentication, and proper validation of input parameters to prevent common security vulnerabilities.

In the context of OSPF multiarea implementation, adjacency issues can often be resolved by specifying the type of network on the interface. In this case, option B “ip ospf network point-to-point” is appropriate as it helps in forming OSPF adjacency over point-to-point links by allowing OSPF to use a simpler neighbor discovery process, which can resolve adjacency issues. References := Implementing and Operating Cisco Service Provider Network Core Technologies

 The number 2 in the configuration “snmp-server community ciscotest ro 2” is significant because it refers to the numeric name of the Access Control List (ACL) that contains the list of SNMP managers with access to the agent. In this context, “ro” stands for read-only, meaning that SNMP managers listed in ACL 2 can only read data from the SNMP agent but cannot modify it. The ACL defines which IP addresses are allowed to access SNMP data. References: Implementing and Operating Cisco Service Provider Network Core Technologies source documents or study guide

The available PHY modes to implement an IOS XR Gigabit Ethernet interface are MAN (Metropolitan Area Network) and WAN (Wide Area Network). References:

Cisco IOS XR Software Configuration Guide

Cisco ASR 9000 Series Aggregation Services Routers Interface and Hardware Component Configuration Guide

Hr40wan - 10 Gigabit Ethernet WAN PHY Controller Commands on Cisco IOS XR

10-Gigabit Ethernet WAN PHY Controller Commands 

The correct configuration to ensure that SNMP servers acknowledge the notifications they receive is to use the snmp-server host command with the Informs keyword. This configuration sends Inform requests instead of Trap messages. Unlike Traps, Inform requests are acknowledged by the receiving SNMP server, ensuring that the notification has been received. If an Inform request is not acknowledged, the SNMP agent resends the notification.

References: The information is based on the Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) training, which teaches how to configure, verify, troubleshoot, and optimize next-generation, Service Provider IP network infrastructures.

When creating new Cisco MPLS TE tunnels, the headend router sends a Path message to reserve bandwidth on the path to the tunnel’s tailend router. The Path message is part of the RSVP (Resource Reservation Protocol) used in signaling and establishing MPLS TE tunnels. It carries information about the requested resources and desired parameters for the tunnel123. References: Configuring MPLS TE RSVP, MPLS TE RSVP-TE, MPLS TE Theory.

Model-driven telemetry (MDT) in a service provider environment uses a push model to send data to network monitoring tools. This method is beneficial because it allows for the streaming of data from network devices to monitoring tools in real-time, using reliable transport mechanisms. This approach is more efficient than traditional polling methods like SNMP, as it can provide faster and more granular data updates, which is crucial for maintaining network performance and reliability123.

References: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

The absence of routes learned by PE4 from PE5 in other PE routers’ routing tables is likely due to missing route target configurations. Route targets are crucial for importing and exporting VPN routes between VRFs in MPLS Layer 3 VPNs.

Option D is correct because advertising the route targets for PE5 to the other PEs will allow them to import routes from PE5 into their respective VRFs, facilitating communication across the Layer 3 VPN.

References :=

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) source book and study guide.